Category

Category

Category: NEW PRODUCTS

NEW PRODUCTS

Showing 33–37 of 37 results

  • ZIVE MP1-4CH housing – high quality multichannel potentiostat/galvanostat/impedance analyzer

    • High quality multichannel potentiostat/galvanostat/impedance analyzer
    • Voltage range : ±10V
    • Current range : 100nA~1A (10nA with gain)
    • Channel expandable up to 16 channels per PC

     

    Application

    • Corrosion
    • Material testing
    • Sensor
    • Bio-Electrochemistry
    • Battery / Supercapacitor
    • Fuel cell
    • Solar cell
    • Other Echem experiments

    Features

    • high quality multichannel potentiostat/galvanostat/impedance analyzer
    • voltage range : ±10V
    • current range : 9 ranges
      – 100nA to 1A (10nA with gain)
    • capable of multitude of applications
      – corrosion, general electrochemistry, sensor, battery, fuel cell,
      supercapacitor, solar cell, etc.
    • plug & play type fully independent channel
    • channel expandable up to 16 channels per PC
    • frequency range : 10uHz ~ 1Mhz
    • 14 EIS techniques capability including multisine
    • voltage pulse or current pulse charge/discharge test(GSM,CDMA etc.),
      sine wave function for ripple simulation in energy software package
      & pulse plating available
    • high speed data sampling time
      – 2usec or 3usec depending on data point numbers
    • fast sweep mode(5000V/sec with 10mV data sampling)
    • iR compensation and measurement
    • 3 measurement/control voltage ranges &
      9 measurement/control current ranges
    • internal 542,000 data point storage & continuing experiment regardless
      of PC failure.
    • can be interfaced to a separate booster for high current applications
    • one auxiliary voltage measurement is available
    • inclues basic software, Energy/Impedance/Battery/Echem analysis software packages
    • free software upgrade

    Experimental Techniques

    Basic techniques

    • Potentiostatic
    • Galvanostatic
    • Double step potentiostatic
    • Double step galvanostatic
    • OCP measurement
    • Potential sweep
    • Current sweep
    • Cyclic voltammetry
    • Fast potential sweep
    • Potentiostatic Ru measurement
    • Galvanostatic Ru measurement

    Advanced Software Package(Included)

    • EIS software package(EISe)
      – Potentiostat EIS
      – Galvanostatic EIS
      – Pseudo galvanostatic EIS
      – OCP* EIS
      – Potentiodynamic PEIS
      – Galvanodynamic GEIS
      – Poteniodynamic HFR
      – Galvanodynamic HFR
      – Potentiostatic HFR monitor
      – Galvanostatic HFR monitor
      – Multisine potentiostatic EIS
      – Multisine galvanostatic EIS
      – Intermittent potentiostatic EIS
      – Intermittent galvanostatic EIS
      (*) The system measures open circuit potential before each frequency
      change and applies AC sine wave on this potential.
    • Corrosion software package(CORe)
      – Tafel(Tafel experiment)
      – Rp(Polarization resistance)
      – RpEc trend
      – PDYN(Potentiodynamic)
      – CYPOL(Cyclic polarization resistance)
      – GDYN(GalvanoDynamic)
      – Reactivation
      – Galvanic corrosion
      – Potentiostatic ECN
      – Galvanostatic ECN
      – ZRA mode ECN
    • Energy software package(BATe)
      a) Battery test technique
      – CC/CV testforcycle life test of lithium battery
      – CC/CC tet forcyclelifetestofNiCd or NiMH battery
      – Discharging test
      – EVS(electrochemical voltage spectroscopy)
      – Variable scan rate CV
      – Potentiostatic IV curve
      – Galvanostatic IV curve
      – Steady state CV
      – PITT(Potentiostatic intermittent titration technique) test
      – GITT(Galvanostatic intermittent titration technique) test
      – Pulse mode is available for GSM & CDMA profile.
      Pulse shape profile can be measured by user’s demand.
      b) Control mode
      – Charge : CC, CC-CV, pulse, sine wave
      – Discharge : CC, CP, CR, pulse, sine wave
      c) Cut-off condition
      – Time, voltage, current, power, auxV etc.
      – Various battery charge/discharge test is available including
      pulse discharge for GSM, CDMA application
    • Electrochemical analysis software package(EASe)
      a) Step techniques
      – CA(Chronoamperometry)
      – CC(Chronocoulometry)
      – CP(Chronopotentiometry)
      b) Sweep techniques
      – LSV(Linear sweep voltammetry)
      – SDV(Sampled DC voltammetry)
      – Fast CV
      – Fast LSV
      c) Pulsed techniques
      – DPV(Differential pulse voltammetry)
      – SWV(Square wave voltammetry)
      – DPA(Diff.pulse amperometry)
      – NPV(Normal pulse voltammetry)
      – RNPV(Reverse normal pulse voltammetry)
      – DNPV(Differential normal pulse voltammetry)

    Options

    • Power booster
    Read more

  • ZIVE SP1 – potentiostat/galvanostat/ZRA

    • Potentiostat/galvanostat/ZRA at affordable price
    • Control voltage range: ±10V
    • Control current range:9 ranges, 10nA~1A (10nA with gain)

     

    Application

    • Battery
    • Super capacitor
    • Fuel cell
    • Corrosion
    • Sensor
    • Solar cell
    • Other Echem experiments

    Features

    • economical high quality potentiostat/galvanostat/impedance analyzer
    • compact size with full functions
    • ±10V@1Amp control range
    • wide current ranges(1A to 10nA) for various applications
    • built-in FRA : enables EIS tests by using software
    • 14 EIS techniques capability including multisine
    • capable of multitude of applications
      – corrosion, general electrochemistry, sensor, battery, fuel cell,
      supercapacitor, solar cell, etc.
    • bipolar pulse capability
    • voltage pulse or current pulse charge/discharge test(GSM,CDMA etc.),
      sine wave function for ripple simulation withenergysoftwarepackage
      & pulse plating available
    • high speed data sampling time
      – 2usec or 3usec depending on data point number
    • iR compensation and measurement
    • 3 measurement/control voltage ranges &
      9 measurement/control current ranges
    • internal 542,000 data point storage & continuing experiment regardless
      of PC failure.
    • multichannel configuration available
    • free software upgrade

    Experimental Techniques

    Basic techniques

    • Potentiostatic
    • Galvanostatic
    • Double step potentiostatic
    • Double step galvanostatic
    • OCP measurement
    • Potential sweep
    • Current sweep
    • Cyclic voltammetry
    • Fast potential sweep
    • Potentiostatic Ru measurement
    • Galvanostatic Ru measurement

    Advanced Software Package(Included)

    • EIS software package(EISe)
      – Potentiostat EIS
      – Galvanostatic EIS
      – Pseudo galvanostatic EIS
      – OCP* EIS
      – Potentiodynamic PEIS
      – Galvanodynamic GEIS
      – Poteniodynamic HFR
      – Galvanodynamic HFR
      – Potentiostatic HFR monitor
      – Galvanostatic HFR monitor
      – Multisine potentiostatic EIS
      – Multisine galvanostatic EIS
      – Intermittent potentiostatic EIS
      – Intermittent galvanostatic EIS
      (*) The system measures open circuit potential before each frequency
      change and applies AC sine wave on this potential.
    • Corrosion software package(CORe)
      – Tafel(Tafel experiment)
      – Rp(Polarization resistance)
      – RpEc trend
      – PDYN(Potentiodynamic)
      – CYPOL(Cyclic polarization resistance)
      – GDYN(GalvanoDynamic)
      – Reactivation
      – Galvanic corrosion
      – Potentiostatic ECN
      – Galvanostatic ECN
      – ZRA mode ECN
    • Energy software package(BATe)
      a) Battery test technique
      – CC/CV testforcycle life test of lithium battery
      – CC/CC tet forcyclelifetestofNiCd or NiMH battery
      – Discharging test
      – EVS(electrochemical voltage spectroscopy)
      – Variable scan rate CV
      – Potentiostatic IV curve
      – Galvanostatic IV curve
      – Steady state CV
      – PITT(Potentiostatic intermittent titration technique) test
      – GITT(Galvanostatic intermittent titration technique) test
      – Pulse mode is available for GSM & CDMA profile.
      Pulse shape profile can be measured by user’s demand.
      b) Control mode
      – Charge : CC, CC-CV, pulse, sine wave
      – Discharge : CC, CP, CR, pulse, sine wave
      c) Cut-off condition
      – Time, voltage, current, power, auxV etc.
      – Various battery charge/discharge test is available including
      pulse discharge for GSM, CDMA application
    • Electrochemical analysis software package(EASe)
      a) Step techniques
      – CA(Chronoamperometry)
      – CC(Chronocoulometry)
      – CP(Chronopotentiometry)
      b) Sweep techniques
      – LSV(Linear sweep voltammetry)
      – SDV(Sampled DC voltammetry)
      – Fast CV
      – Fast LSV
      c) Pulsed techniques
      – DPV(Differential pulse voltammetry)
      – SWV(Square wave voltammetry)
      – DPA(Diff.pulse amperometry)
      – NPV(Normal pulse voltammetry)
      – RNPV(Reverse normal pulse voltammetry)
      – DNPV(Differential normal pulse voltammetry)
    Read more

  • ZIVE SP2 – high quality potentiostat/galvanostat/impedance analyzer

    • Versatile high quality potentiostat/galvanostat/impedance analyzer
    • Control voltage range: ±10V, ±1V, ±100mV
    • Control current range: 200pA ~ 2A (200pA with gain, 11 ranges)

     

    Application

    • Battery/Super capacitor
    • Fuel cell
    • Corrosion
    • Sensor
    • Solar cell
    • Other Echem experiments

    Features

    • high quality potentiostat/galvanostat/impedance analyzer
    • ±10V@2Amp control range
    • current range (11 ranges)
      – 2A to 200pA
      – 200pA with gain
    • frequency range : 10uHz ~ 2MHz
    • built-in FRA : enables EIS tests
    • 14 EIS techniques capability including multisine
    • capable of multitude of applications
      – corrosion, general electrochemistry, sensor, battery, fuel cell,
      supercapacitor, solar cell, etc.
    • bipolar pulse capability
    • voltage pulse or current pulse charge/discharge test(GSM,CDMA etc.),
      sine wave function for ripple simulation in battery test package
      & pulse plating available
    • high speed data sampling time
      – 2usec or 3usec depending on data point number
    • fast sweep mode(5000V/sec with 10mV data sampling)
    • iR compensation & measurement
    • 3 measurement/control voltage ranges &
      11 measurement/control current ranges
    • internal 542,000 data point storage & continuing experiment regardless
      of PC failure.
    • LCD display
    • software package
      – Corrosion software package
      – EIS software package
      – Electrochemical analysis software package
      – Energy software package
    • multichannel configuration available by connecting multiple SP2 or other ZIVE products
    • power booster(ZIVE ZB series) available
    • inclues basic software, Energy(battery)/Impedance/Corrosion/Echem analysis software packages
    • free software upgrade

    Experimental Techniques

    Basic techniques

    • Potentiostatic
    • Galvanostatic
    • Double step potentiostatic
    • Double step galvanostatic
    • OCP measurement
    • Potential sweep
    • Current sweep
    • Cyclic voltammetry
    • Fast potential sweep
    • Potentiostatic Ru measurement
    • Galvanostatic Ru measurement

    Advanced software techniques(Included)

    • EIS software package(EIS)
      – Potentiostat EIS
      – Galvanostatic EIS
      – Pseudo galvanostatic EIS
      – OCP* EIS
      – Potentiodynamic PEIS
      – Galvanodynamic GEIS
      – Poteniodynamic HFR
      – Galvanodynamic HFR
      – Galvanostatic HFR monitor
      – Potentiostatic HFR monitor
      – Multisine potentiostatic EIS
      – Multisine galvanostatic EIS
      – Intermittent potentiostatic EIS
      – Intermittent galvanostatic EIS
      (*) The system measures open circuit potential before each frequency
      change and applies AC sine wave on this potential.
    • Corrosion software package(COR)
      – Tafel(Tafel experiment)
      – Rp(Polarization resistance)
      – RpEc trend
      – PDYN(Potentiodynamic)
      – CYPOL(Cyclic polarization resistance)
      – GDYN(GalvanoDynamic)
      – Reactivation
      – Galvanic corrosion
      – Potentiostatic ECN
      – Galvanostatic ECN
      – ZRA mode ECN
    • Energy software package(BAT)
      a) Battery test technique
      – CC/CV testforcycle life test of lithium battery
      – CC/CC tet forcyclelifetestofNiCd or NiMH battery
      – Discharging test
      – EVS(electrochemical voltage spectroscopy)
      – Variable scan rate CV
      – Potentiostatic IV curve
      – Galvanostatic IV curve
      – Steady state CV
      – PITT(Potentiostatic intermittent titration technique) test
      – GITT(Galvanostatic intermittent titration technique) test
      – Pulse mode is available for GSM & CDMA profile.
      Pulse shape profile can be measured by user’s demand.
      b) Control mode
      – Charge : CC, CC-CV, pulse, sine wave
      – Discharge : CC, CP, CR, pulse, sine wave
      c) Cut-off condition
      – Time, voltage, current, power, auxV etc.
      – Various battery charge/discharge test is available including
      pulse discharge for GSM, CDMA application
    • Electrochemical analysis software package(EAS)
      a) Step techniques
      – CA(Chronoamperometry)
      – CC(Chronocoulometry)
      – CP(Chronopotentiometry)
      b) Sweep techniques
      – LSV(Linear sweep voltammetry)
      – SDV(Sampled DC voltammetry)
      – Fast CV
      – Fast LSV
      c) Pulsed techniques
      – DPV(Differential pulse voltammetry)
      – SWV(Square wave voltammetry)
      – DPA(Diff.pulse amperometry)
      – NPV(Normal pulse voltammetry)
      – RNPV(Reverse normal pulse voltammetry)
      – DNPV(Differential normal pulse voltammetry)

    Options

    • Power booster
    Read more

  • ZIVE SP3 – potentiostat/galvanostat/impedance analyzer

    • Research grade potentiostat/galvanostat/impedance analyzer
    • Control voltage range: ±10V, ±1V, ±100mV
    • Control current range: 2nA ~ 2A (2nA with gain, 10 ranges)

     

    Application

    • Battery/Super capacitor
    • Fuel cell
    • Coating
    • Corrosion
    • Sensor
    • Solar cell
    • Other Echem experiments

    Features

    • high compliance voltage potentiostat/galvanostat/impedance analyzer
    • ±10V@2Amp control range
    • current range (10 ranges)
      – 2A to 20nA
      – 2nA with gain
    • frequency range : 10uHz ~ 1MHz
    • 14 EIS techniques capability including multisine
    • Electrical isolation floating potentiostat can be used with autoclaves, mechanical stress apparatus, or pipeline probes.
    • suitable for typical corrosion applications
      – pitting, crevice corrosion, and passivation behavior
      – corrosion rate (Tafel Plot) determination
      – active/passive characteristics
      – passivation rates
      – anodic and cathodic protection
    • high speed data sampling time
      – 2usec or 3usec depending on data point number
    • fast sweep mode (5000V/sec with 10mV data sampling)
    • iR compensation & measurement
    • 3 measurement/control voltage ranges &
      10 measurement/control current ranges
    • internal 542,000 data point storage & continuing experiment regardless of PC failure
    • LCD display
    • software package
      – Corrosion software package(COR3)
      – EIS software package
      – Electrochemical analysis software package
      – Energy software package
    • multichannel configuration available by connecting multiple SP3 or other ZIVE products
    • included basic software, Energy(battery)/Impedance/Corrosion/Echem analysis software packages
    • free software upgrade

    Experimental Techniques

    Basic techniques

    • Potentiostatic
    • Galvanostatic
    • Double step potentiostatic
    • Double step galvanostatic
    • OCP measurement
    • Potential sweep
    • Current sweep
    • Cyclic voltammetry
    • Fast potential sweep
    • Potentiostatic Ru measurement
    • Galvanostatic Ru measurement

    Advanced software techniques (Included)

    Options

    • Power booster

     

    Read more

  • ZIVE SP5 – high quality potentiostat/galvanostat/impedance analyzer

    • Versatile high quality potentiostat/galvanostat/impedance analyzer
    • Control voltage range : ±10V, ±1V, ±100mV
    • Control current range : 50pA ~ 5A (500pA with gain, 11 ranges)

     

    Application

    • Battery / Super capacitor
    • Fuel cell
    • Corrosion
    • Sensor
    • Solar cell
    • Other Echem experiments

     

    Features

    • high quality potentiostat/galvanostat/impedance analyzer
    • ±10V@5Amp control range
    • current range (11 ranges)
      – 5nA to 5A
      – 500pA with gain
    • frequency range : 10uHz ~ 1MHz
    • built-in FRA : enables EIS tests
    • 14 EIS techniques capability(option) including multisine
    • capable of multitude of applications
      – corrosion, general electrochemistry, sensor, battery, fuel cell,
        supercapacitor, solar cell, etc.
    • bipolar pulse capability
    • voltage pulse or current pulse charge/discharge test(GSM,CDMA etc.),
      sine wave function for ripple simulation in battery test package
      & pulse plating available
    • high speed data sampling time
      – 2usec or 3usec depending on data point numbers
    • fast sweep mode(5000V/sec with 10mV data sampling)
    • iR compensation & measurement
    • 3 measurement/control voltage ranges &
      11 measurement/control current ranges
    • internal 542,000 data point storage & continuing experiment regardless
      of PC failure.
    • LCD diaplay
    • multichannel configuration available by connecting multiple SP5 or other ZIVE products
    • external booster (ZIVE ZB series) available
    • inclues basic software, Energy/Impedance/Battery/Echem analysis software packages
    • can use EIS data analysis software, ZMANTM and DC data analysis software
      IVMANTMwithough purchasing license code
    • free software upgrade   

     

     

    Experimental Techniques

    Basic techniques

    • Potentiostatic
    • Galvanostatic
    • Double step potentiostatic
    • Double step galvanostatic
    • OCP measurement
    • Potential sweep
    • Current sweep
    • Cyclic voltammetry
    • Fast potential sweep
    • Potentiostatic Ru measurement
    • Galvanostatic Ru measurement

     

    Advanced software techniques(included)

    • EIS software package(EIS)
      – Potentiostat EIS
      – Galvanostatic EIS
      – Pseudo galvanostatic EIS
      – OCP* EIS
      – Potentiodynamic PEIS
      – Galvanodynamic GEIS
      – Poteniodynamic HFR
      – Galvanodynamic HFR
      – Galvanostatic HFR monitor
      – Potentiostatic HFR monitor
      – Multisine potentiostatic EIS
      – Multisine galvanostatic EIS
      – Intermittent potentiostatic EIS
      – Intermittent galvanostatic EIS
      (*) The system measures open circuit potential before each frequency
          change and applies AC sine wave on this potential.
       
    • Corrosion software package(COR)
      – Tafel(Tafel experiment)
      – Rp(Polarization resistance)
      – RpEc trend
      – PDYN(Potentiodynamic)
      – CYPOL(Cyclic polarization resistance)
      – GDYN(GalvanoDynamic)
      – Reactivation
      – Galvanic corrosion
      – Potentiostatic ECN
      – Galvanostatic ECN
      – ZRA mode ECN
       
    • Energy software package(BAT)
      a) Battery test technique
         – CC/CV test for cycle life test of lithium battery  
         – CC/CC tet for cycle life test of NiCd or NiMH battery
         – Discharging test
         – EVS(electrochemical voltage spectroscopy)
         – Variable scan rate CV
         – Potentiostatic IV curve
         – Galvanostatic IV curve
         – Steady state CV
         – PITT(Potentiostatic intermittent titration technique) test
         – GITT(Galvanostatic intermittent titration technique) test
         – Pulse mode is available for GSM & CDMA profile.
           Pulse shape profile can be measured by user’s demand.
      b) Control mode
         – Charge : CC, CC-CV, pulse, sine wave
         – Discharge : CC, CP, CR, pulse, sine wave
      c) Cut-off condition
         – Time, voltage, current, power, auxV etc.
         – Various battery charge/discharge test is available including
           pulse discharge for GSM, CDMA application
       
    • Electrochemical analysis software package(EAS)
      a) Step techniques
         – CA(Chronoamperometry)
         – CC(Chronocoulometry)
         – CP(Chronopotentiometry)
      b) Sweep techniques
         – LSV(Linear sweep voltammetry)
         – SDV(Sampled DC voltammetry)
         – Fast CV
         – Fast LSV
      c) Pulsed techniques
         – DPV(Differential pulse voltammetry)
         – SWV(Square wave voltammetry)
         – DPA(Diff.pulse amperometry)
         – NPV(Normal pulse voltammetry)
         – RNPV(Reverse normal pulse voltammetry)
         – DNPV(Differential normal pulse voltammetry)

     

    Options

    • Power booster  
    Read more