Category: Screen Printed Electrodes

Screen Printed Electrodes

Showing 17–27 of 27 results

  • AC9C.WSP Electrochemical sensor

    Amperometric sensor with an array of 8 working electrodes and 1 common reference electrode made by sputtering with integrated connector

    Dimensions: 59.0 x 12.7 x 0.63 mm

    WE material: Au

     

    The sensor is formed on corundum polished ceramic base. On to this surface eight working electrodes, and the reference electrode are applied by sputtering. The working electrodes are made of gold. At the end of the sensor there is an integrated connector. It is connected with the active part by the silver conducting paths which are covered by a dielectric protection layer. Different bio-chemically active substances can be immobilised on the working electrodes of the sensor.

    Read more
  • CC1 Electrochemical sensor

    A conductivity sensor made by thick film technology with interdigitated structure of electrodes

    Dimensions: 25.4 x 7.26 x 0.63 mm

    WE material: Au/Pt, Au, Pt, Ag, C

     

    The sensor is formed on a corundum ceramic base. Onto this surface two interdigitated structures of electrodes are applied. The electrodes are made of Platinum-Gold alloy in standard product CC1.WS. At the end of the sensor there is a contact which is connected with the active part by the silver conducting path which is covered by a dielectric protection layer. A bio-chemically active substance can be immobilised on the working electrode of the sensor.

    Read more
  • CC2 Electrochemical sensor

    A conductivity sensor with two active parts made by thick film technology with interdigitated structure of electrodes

    Dimensions: 25.4 x 7.26 x 0.63 mm

    WE material: Au/Pt, Au, Pt, Ag, C

     

    The sensor is formed on a corundum ceramic base. Onto this surface two interdigitated structures of electrodes are applied. The electrodes are made of Platinum-Gold alloy in standard product CC2.WS. At the end of the sensor there is a contact which is connected with the active part by the silver conducting path which is covered by a dielectric protection layer. A bio-chemically active substance can be put on the electrodes, one interdigitated structure, the second structure is reference.

    Read more
  • CC3.WSP Electrochemical sensor

    A conductivity sensor with two active parts made by sputtering with interdigitated structure of electrodes

    Dimensions: 25.4 x 7.26 x 0.63 mm

    WE material: Au

     

    The sensor is formed on a corundum ceramic base. Onto this surface two interdigitated structures of electrodes are applied. The electrodes are applied by sputtering. At the end of the sensor there is a contact which is connected with the active part by the gold conducting path which is covered by a polymer dielectric protection layer. A bio-chemically active substance can be immobilised on the electrodes, one interdigitated structure, the second structure is reference.

    Read more
  • CC4 Electrochemical Sensor Cell

    Conductometric sensor integrated with a specialised cell to create the CC4 Electrochemical Sensor Cell.

     

    The CC4 sensor is formed on a corundum ceramic base. The structure consists of two platinum working electrodes (Pt WE) and an integrated thermistor on the opposite side covered by a dielectric protection layer.

     

    Possible use of the CC4 sensor:

    • Quality control of distillation
    • Checking of waste waters from treatment plants, i.e. checking of Salt content

     

    Read more
  • Custom and Modified Screen Printed Electrodes (SPE)

    We offer our customers Modified and Custom Screen Printed Sensors based on their demands and needs, we will also recommend to the customer if there is a better option for their intended purposes.

     

    Examples of possible Modified SPE Surfaces

    Graphine, Streptavidin, Polyaniline and High-purity Materials.

     

    High-purity material on WE

    We can provide polished working electrode or insert a high-purity material on WE (99.9% or better).

    The WE can be applied also by sputtering.

     

    Materials of WE

    We can offer you not only standard materials as Au/Pt, Au, Pt, Ag, C (carbon) but also glassy carbon, Ni, Cu, and other materials.

     

    Special Active Surfaces

    We can provide SPEs with Special Active Surfaces using Copper (Cu), Nickle (Ni), Magnesium (Mg), Bismuth (Bi) and Zirconium (Zr). 

     

    Sensor/device size

    The Technological capabilities and our experience and knowledge enable us to produce devices from as small as 3 x 6 mm, up to as large as 150 x 1200 mm.

    Read more
  • MAC Microreactor

    Microreactor for sensor used for measurement of small volume (20 µl) in closed system.

    Dimensions: 7.26 (width) x 0.63 mm (thickness)

     

    The MAC Microreactor is attached to the Sensor/s that the customer would like to use, and allows the customer to place a solution (20µl) for carrying out measurements directly above the WE in a contained area. The lid of the MAC Microreactor can be closed sealing the solution and helps avoid contaminants from affecting the test.

    Read more
  • SIRE Sensor Cell Set (Sensor with Injectable Recognition Element)

    The SIRE Sensor Cell Set consists of a sensor with an integrated non-removable specialised chamber.

     

    The set also contains a syringe which will allow the injection of the recognition element (Enzyme).
    The SIRE Sensor Cell uses the concept of soluble enzymes into a reaction chamber separated from the sample by a semi permeable dialysis membrane. The analyte (for example maltose), enters into the reaction chamber by diffusion. The analyte reacts with the recognition enzymes creating H2O2 which is oxidized on a screen printed Pt electrode. The current corresponds to the amount of analyte.

     

    * For this product, we recommend our customers use the Training Service from BVT.

    (https://bvt.cz/produkt/offer-of-long-term-automated-measurements-on-bvt-apparatus/)

    Read more
  • STK Starting kit

    Starting kit STK.S

    Set of twenty electrochemical sensors with a simple connector to find the best one to fit your application.

    Starting kit is the set of twenty different electrochemical sensors to find the best one to fit your application. Starting kit contains 10 types of electrochemical sensors (2 sensors of each type), simple sensors connector and sensors box with numbered positions and silica gel.

    Read more
  • STK-C Customer Starting kit

    Starting Kit STK.S-C

    The customer starter kit is a set of twenty different electrochemical sensors to find the best one that suits your application.

    The starter set contains at least 5 pcs of sensors type AC1.W*.R* from the given type of sensors with a working electrode diameter (Dw) 1 or 2 mm stored in a box with numbered positions and silica gel.

    The exact choice of the given types of sensors in the kit is at the request of the customer.

    Read more
  • TS Testing Sensor

    Simple identifier of electrochemical hardware error

    Dimensions: 25.4 x 7.26 x 0.63 mm

     

    Electrochemical measurements are very sensitive. Sometimes cables, connectors and their wetness can create the measurement errors. Testing sensor enables simple identification of electrochemical hardware error. The sensor has same geometry as AC1 type but its response produced by resistor. The response is stable and independent on chemistry. Testing sensor is formed on a corundum ceramic base. At the end of the sensor there is a contacting field which is connected with the SMD resistors by the silver conducting paths which are covered by a dielectric protection layer.

    Read more