MAC Microreactor

You may also like…

• 

  KA1.* Connector for Electrochemical Sensors

  The connector enables the use of the biosensor based on the substrates AC1, AC4, AC11, AC13, CC1, CC2 and TS1 in classical electrochemical arrangement.

  Read more
• 

  Sensit Smart

  Smartphone potentiostat

  • Capable of EIS up to 200 kHz
  • Built around the EmStat Pico module
  • Potential range -1.7 to +2 V
  • Current ranges 100 nA – 5 mA (max ±3 mA)

   

  The Sensit Smart can be directly inserted in a smartphone or tablet and controlled via the Android app PStouch. You can use the USB-C Female to USB-A cable to connect the Sensit Smart to a classic USB port on your PC and control the Sensit Smart via our PC software PSTrace. 

  The Sensit Smart supports most common electrochemical techniques, including Cyclic Voltammetry, Square Wave Voltammetry and Impedance Spectroscopy (FRA/EIS).

   

  More information can be found through the link: https://www.palmsens.com/product/sensit-smart/

   

  The Sensit Smart comes with:

  • Dummy Cell (SPE version)
  • SPE to screw-terminal adapter
  • USB-C Female to USB-A cable
  • USB-C Female to Micro USB adapter
  • USB-C Extension cable
  • USB-C port protector
  • PSTrace software for Windows (activation code for my.palmsens.com)
  • PStouch app for Android (find it in the Google Play Store)

   

  Compatible with most common Screen Printed Electrodes / Sensors
  Sensor pitch:	2.54 mm
  Electrode connections:	RE, WE, CE
  Allowed sensor thickness:	Between 0.1 mm and 0.8 mm
  Maximum sensor width:	11 mm

   

  Read more
• 

  USB Potentiostat Galvanoplot

  USB Potentiostat Galvanoplot is a super small, low-cost and affordable device suitable for dedicated volume applications, which is optimized for screen-printed sensor and biosensor applications. It can be used in many other research areas and with other electrochemical sensors, for corrosion measurement, battery and super-capacitors or fuel cells.

  It is capable of performing all common Amperometric and Voltammetric electrochemistry protocols (CA, LSV, CV, DPV, NPV, SVW, GAL) and can be used with three electrode (WE/RE/CE) and two electrode (WE/RE-CE) setups. Plug the device directly into an Android mobile device through OTG port for a true on-site analysis experience. It is possible to choose from two types of interfaces allowing direct insertion of the BVT SPE sensors or the use of 3 classical electrodes with 2 mm banana plugs (WE, RE, CE).

   

  Specifications

  • Dimensions: 39x17x8 mm
  • Weight: 5 g without sensor interface
  • Voltage scan range: +-3V @1mV resolution
  • Max current: 2000 nA
  • Current resolution: 300pA@1KSPS/ 100pA@100SPS/ 30pA/10 SPS resolution
  • Noise around: 50nA@1KSPS/ 7nA@100SPS/ 400pA/10 SPS

   

  • Protocols: CA, LSV, CV, DPV, NPV, SVW, GAL
  • Cell type: WE/RE/CE and WE/RE-CE
    Connectivity: USB-C (Plug the device directly into an Android mobile device through OTG port for a true on-site analysis experience)

   

  • Operating system compatibility: Windows 8, 10+
  • Advanced analysis – filtering and auto peaks

   

  Device Usage

  • Electrochemical measurements
  • Measurements with biosensors and electrochemical sensors
  • Measurement of biochemical activity of a sample
  • Corrosion measurement

   

  Read more
• 

  PalmSens4

  The PalmSens4, is a USB and battery powered Potentiostat, Galvanostat, and optional a Frequency Response Analyser (FRA) for Electrochemical Impedance Spectroscopy (EIS).

   

  Compact, versatile and powerful

  • (Bi)Potentiostat / Galvanostat / Impedance Analyzer
  • FRA / EIS: 10 μHz up to  1 MHz
  • 9 current ranges: 100 pA to 10 mA
  • 18-bit resolution
  • Bluetooth or USB connection

   

  The PalmSens4 has a large potential range (-5V to 5V or -10V to 10V) and current range (100 pA to 10 mA) with a high resolution and low noise. The economical PalmSens4 is a complete laboratory instrument but its compact and rugged design makes it also ideal for field work.

  Connecting via Bluetooth guarantees a perfectly floating measurement.

   

  More information can be found through the link: https://www.palmsens.com/product/palmsens4/

   

  Configurable

  PalmSens4 comes in different configurations:

  • ±5 V or ±10 V potential range
  • EIS/FRA with maximum frequency of 100 kHz or 1 MHz
  • optional BiPotentiostat module for second WE
  • optional iR-Compensation

  Standard included

  • Rugged carrying case
  • High quality, double shielded cell cable with
    2 mm banana connectors for Working, Counter, Reference electrode and Ground
  • Crocodile clips
  • Dummy cell
  • USB cable
  • Manual and Quick Start document
  • PSTrace software for Windows

   

   

  Read more