Category

Category

hokus pokus

The connector enables the use of the electrochemical sensor AC9C or biosensor based on the AC9C substrate in classical electrochemical arrangement.

Useful Documents

KA9.s.* Datasheet

Connector quality and its effects on measurements with Screen Printed Electrodes sensors (SPE)

Category:

You may also like…

  • AC9C Electrochemical sensor

    Amperometric sensor with an array of 8 working electrodes and 1 common reference electrode made by thick film technology with integrated connector

    Dimensions: 59.0 x 12.7 x 0.63 mm

    WE material: Au/Pt, Au, Pt, Ag, C

     

    The sensor is formed on a corundum ceramic base. On to this surface eight working electrodes, and the reference electrode are applied. The electrodes can be made of variety of materials (see below). At the end of the sensor there is an integrated connector. It is connected with the active part by the silver conducting paths which are covered by a dielectric protection layer. Different bio-chemically active substances can be immobilised on the working electrodes of the sensor.

    Read more

  • AC9C Holder

    Holder for AC9C electrochemical sensor with an array of 8 working electrodes and 1 common reference electrode. 

     

    It is used for multi-analyte detection. Sensor holder fits in TC9 glass cell opening.

    Read more

  • TC9 Electrochemical Glass Cell

    Borosilicate glass cell serves for electrochemical measurements.

     

    The analyzed solution can be thermostated by external thermostat MT1-1.

     

    Cell openings are designed for stirrer ST9 or mini RDE and connector KA9.s with folder for electrochemical sensor AC9C, classical electrodes WCEc, ACEc and RCEc. The device enables the measurement with inserted samples.

    Read more

  • AC9C.WSP Electrochemical sensor

    Amperometric sensor with an array of 8 working electrodes and 1 common reference electrode made by sputtering with integrated connector

    Dimensions: 59.0 x 12.7 x 0.63 mm

    WE material: Au

     

    The sensor is formed on corundum polished ceramic base. On to this surface eight working electrodes, and the reference electrode are applied by sputtering. The working electrodes are made of gold. At the end of the sensor there is an integrated connector. It is connected with the active part by the silver conducting paths which are covered by a dielectric protection layer. Different bio-chemically active substances can be immobilised on the working electrodes of the sensor.

    Read more

Related products

  • ST3 Universal Stirrer for screen printed and classical electrodes

    • Precision Maxon motor with gearbox and encoder
    • ST3 is controlled by PC software
    • ST3 allows the solution to be mixed and particles to be optimally transferred to the surface of the printed or conventional electrodes
    • The construction of stirrer assures the optimum mass transport with the minimum hydrodynamic noise.
    • Stirrer is manufactured from quality and suitable chemical measurements.
    • Revolution range: 20-1300 rpm (with resolution 1 rpm)
    Read more

  • ST1.* Universal Stirrer for screen printed and classical electrodes

    • The universal stirrer ST1 uses a common  micro DC motor
    • ST1 allows the solution to be mixed and  the particles to be optimally transferred  to the surface of the printed or conventional electrodes.
    • The construction of stirrer assures the optimum mass transport with the minimum hydrodynamic noise.
    • The supply voltage 0 – 5 V and the maximum current of 450 mA mean that it can be used as a USB device.
    • The stirrer is manufactured from quality materials and suitable chemical measurements.
    • Revolutions range: 120 – 12 000 rpm
    View products