ER467 High Current Potentiostat

Related products

• 

  EA362 Dual PicoStat

  • High sensitivity 2 channel potentiostat
  • Bipotentiostat and 4-electrode modes of operation

   

  The Dual PicoStat is a two channel high sensitivity potentiostat suitable for use with carbon fiber and ultramicroelectrodes for the monitoring of low current signals (down to picoameperes). It is commonly used for in vivo monitoring of dopamine by amperometry.

  There are two potentiostat channels which enable the unit to also be used as a bipotentiostat (two working electrodes with a common reference and auxiliary electrode) so that dopamine levels can be monitored at two separate locations. Alternatively it can be used to perform duplicate experiments with separate samples, each with a working, reference and auxiliary electrode.

  It can also be used as a 4-electrode voltage clamp (with two current passing and two voltage sensing reference electrodes) for studies of ionic transport across membranes or immiscible interfaces.

  The Dual PicoStat is electrically isolated and is resistant to interference from neural stimulators, and ground loops. It is DC powered and can be used inside Faraday cages if required.

   

  More information can be found through the link: https://www.edaq.com/EA362

   

   

  Read more
• 

  ER466 Integrated Potentiostat System

  • Ideal for cyclic voltammetry, linear sweep and pulse techniques
  • Potentiostat, galvanostat, ammeter and voltmeter modes
  • Maximum 100 mA and ±10 V
  • Expandable using isoPod amplifiers
  • High accuracy 
  • Windows 7, 8 and 10 compatible

   

  The ER466 Integrated Potentiostat System is our most popular potentiostat model, being ideal for cyclic, linear sweep, and most analytical pulse voltammetric experiments, either in the research or teaching laboratory. It also functions as a galvanostat, ZRA (zero resistance ammeter), and high impedance voltmeter (electrometer). Connection to a computer is via a USB cable.

   

  More information can be found through the link: https://www.edaq.com/ER466

  Read more
• 

  EA164 QuadStat

  • Four-channel potentiostat 10mA to 200pA range
  • Separate/common reference and auxiliary electrodes
  • BiPotentiostat
  • Ideal for amperometric biosensors, microbial fuel cells, photovoltaic materials and neurochemistry

   

  The QuadStat is a software-controlled four-channel potentiostat with many Research Advantages (see below). Each channel can be used as a single three-electrode potentiostat. Alternatively two (bipotentiostat), three, or four working electrodes can be used in a single reaction chamber with a common reference and auxiliary electrode. Potential at each working electrode can be independently adjusted between ±2.5 V, or by using an external waveform generator to between ±10 V. The QuadStat can measure currents from pico- to milliamperes, making it ideal for amperometric biosensor research including use as a multichannel monitor for in vivo nitric oxide or dissolved oxgen sensors.

  Two QuadStats can be ‘piggybacked’ to provide eight potentiostat channels.

  By connecting the corresponding auxiliary and reference electrode leads, the QuadStat can be used as a four channel two-electrode (working and counter electrode) potentiostat. There is also a zero resistance ammeter (ZRA) mode of operation on each channel.

   

  More information can be found through the link: https://www.edaq.com/EA164

  Read more
• 

  ER461 EChem Startup System

  Most popular eDAQ potentiostat
  Potentiostat, galvanostat, ZRA and electrometer modes
  Maximum 100 mA and ±10 V

   

  Open your lab to the world of electrochemistry with the economically priced EChem Startup System. It has just about everything you need for most voltammetric experiments. The system is ideal for both research and teaching experiments, and especially for compound characterization with cyclic voltammetry.

   

  More information can be found through the link: https://www.edaq.com/ER461

   

  System Components:

  • ER466 Integrated Potentiostat System
  • ET014 EChem Electrode Kit
  • ES260 EChem Software
  • ES500 Chart and Scope Software

   

  The ER466 Integrated Potentiostat System is our most popular potentiostat model, being ideal for cyclic, linear sweep, and most analytical pulse voltammetric experiments, either in the research or teaching laboratory. It also functions as a galvanostat, ZRA (zero resistance ammeter), and high impedance voltmeter (electrometer). Connection to a computer is via a USB cable.

   

  The EChem Electrode Kit contains gold, platinum and glassy carbon working disk electrodes. Reference and auxiliary electrodes are also included, together with two 3 mL reaction vials and a stand. The electrodes are suitable for use with the eDAQ potentiostats, and can be used in a variety of electrochemical applications.

  Working electrodes, 1 mm disk, PEEK body:
                    ET074-1 Glassy carbon
                    ET075-1 Platinum
                    ET076-1 Gold

  Reference electrode: ET072 Leakless Ag/AgCl
  Auxiliary electrode: ET078-1 Pt coated titanium rod, 1.6 mm diameter
  Two 3-mL reaction vessels with stirrer vane, drilled PTFE gasket and holder
  Lead wire clamp

   

  Available Techniques:

  • Cyclic Voltammetry
  • Linear Sweep Voltammetry *
  • Square Wave Voltammetry *
  • Normal Pulse Voltammetry *
  • Differential Pulse Voltammetry *
  • Multi Pulse Voltammetry
  • Multi Pulse Amperometry
  • Chronoamperometry (single or multistep)
  • Chronocoulometry (single or multistep)
  • Chronopotentiometry (single or multistep)
  • Controlled potential electrolysis
  • Controlled current electrolysis

  * Also available in stripping mode for trace element determination. Metals such as copper, lead, cadmium and zinc can be determined in the ppb range even in an undergraduate lab (no clean room required!).
  Battery technology, corrosion science, conducting polymer and electrosynthesis experiments can also be performed.

  Read more