Category: Potentiostats

Potentiostats

BVT is an authorised distributor of wide range of handheld Potentiostats, Galvanostats and EIS Analyzers from companies PalmSens BV, eDAQ Pty Ltd., BASi and WonATech Co., Ltd.
Customers can order these products directly from BVT in the same price.

https://www.palmsens.com/products-2/
https://www.edaq.com/potentiostats-for-electrochemistry
https://www.basinc.com/epsilon/eclipse
http://www.wonatech.com/
http://www.solarbiotec.com/ ( https://galvanoplot.com/ )

Showing 1–16 of 19 results

  • EA163 Potentiostat

    This modular potentiostat is perfect for cyclic voltammetry and electroanalytical chemistry, and can use two (working and counter), or three (working, auxiliary and reference) electrodes. It can also operate as a galvanostat, ZRA (zero resistance ammeter), and high impedance voltmeter. It must be used together with any e-corder model.

    The bandwidth of the EA163 is 100 kHz and so it is suitable for use with the Z100 Electrochemical Impedance Analyzer.

    More information can be found through the link: https://www.edaq.com/EA163

    Read more
  • EA164 QuadStat

    The QuadStat is a software-controlled four-channel potentiostat with many Research Advantages (see below). Each channel can be used as a single three-electrode potentiostat. Alternatively two (bipotentiostat), three, or four working electrodes can be used in a single reaction chamber with a common reference and auxiliary electrode. Potential at each working electrode can be independently adjusted between ±2.5 V, or by using an external waveform generator to between ±10 V. The QuadStat can measure currents from pico- to milliamperes, making it ideal for amperometric biosensor research including use as a multichannel monitor for in vivo nitric oxide or dissolved oxgen sensors.

    Two QuadStats can be ‘piggybacked’ to provide eight potentiostat channels.

    By connecting the corresponding auxiliary and reference electrode leads, the QuadStat can be used as a four channel two-electrode (working and counter electrode) potentiostat. There is also a zero resistance ammeter (ZRA) mode of operation on each channel.

    More information can be found through the link: https://www.edaq.com/EA164

    Read more
  • EA362 Dual PicoStat

    The Dual PicoStat is a two channel high sensitivity potentiostat suitable for use with carbon fiber and ultramicroelectrodes for the monitoring of low current signals (down to picoameperes). It is commonly used for in vivo monitoring of dopamine by amperometry.

    There are two potentiostat channels which enable the unit to also be used as a bipotentiostat (two working electrodes with a common reference and auxiliary electrode) so that dopamine levels can be monitored at two separate locations. Alternatively it can be used to perform duplicate experiments with separate samples, each with a working, reference and auxiliary electrode.

    It can also be used as a 4-electrode voltage clamp (with two current passing and two voltage sensing reference electrodes) for studies of ionic transport across membranes or immiscible interfaces.

    The Dual PicoStat is electrically isolated and is resistant to interference from neural stimulators, and ground loops. It is DC powered and can be used inside Faraday cages if required.

    More information can be found through the link: https://www.edaq.com/EA362

    Read more
  • EmStat3 Blue

    EmStat Blue is a small and low cost potentiostat with research grade capabilities. It has eight current ranges from 1 nA to 100 mA (EmStat3+ Blue) full scale, with a minimum resolution of 1 pA. It provides the most relevant electroanalytical measurement techniques and is used with the PSTrace software or with PStouch for Android.

    More information can be found through the link: https://www.palmsens.com/product/emstat-blue/

    Read more
  • EmStat4R

    EmStat4R

    Ruggedized potentiostat with battery & Bluetooth

    • Portable: battery, Bluetooth and rugged housing
    • Available with connection module for sensor cable or SPE
    • Potential range ±3 V
    • Max. current ±30 mA
    • Optional impedance analyzer: 10 μHz up to 200 kHz

    Description

    The EmStat4R delivers desktop performance in a rugged enclosure. The EmStat4R is a portable Battery or USB-powered Potentiostat, Galvanostat, and optional a Frequency Response Analyzer (FRA) for Electrochemical Impedance Spectroscopy (EIS). The EmStat4R is great for applications that require low currents, from 30 mA down to picoamps, such as sensor applications. The EmStat4R is controlled with PSTrace for Windows, the Android app PStouch, or you can write your own MethodSCRIPT and control it from any platform or operating system.

    Two versions

    The EmStat4R is available with a cell cable or SPE connection module. Both versions can be configured with optional EIS/FRA with a maximum frequency of 200 kHz. See specifications for more information.

    EmStat4R SNS EmStat4R SPE

    Connection module Cell cable Connection module Screen-printed-electrode
    Cell cable included Yes Cell cable included No
    Electrode connections WE, RE, CE and ground Electrode connections RE, WE, CE
    Connectors 2 mm banana Sensor pitch 2.54 mm
        Maximum sensor width 11 mm
        Allowed sensor thickness Between 0.1 mm and 0.8 mm

     

    Standard included

    A standard EmStat4R includes a rugged carrying case with:

    • EmStat4R
    • Rugged case
    • USB-C cable
    • Cell cable: high quality, double-shielded cable with 2 mm banana connectors for Working, Counter, Reference electrode and Ground
    • 4 crocodile clips
    • Dummy Cell
    • PSTrace software for Windows (on USB drive)
    • Manual (hardcopy)
    • Quick Start document
    • Calibration report
    • Three year warranty

     

     

    More information can be found through the link: https://www.palmsens.com/product/emstat4r/ 

    Read more
  • EmStat4S

    The EmStat4S delivers desktop performance in the palm of your hand. The EmStat4S is a portable USB-powered Potentiostat, Galvanostat, and optional a Frequency Response Analyser (FRA) for Electrochemical Impedance Spectroscopy (EIS). The EmStat4S is controlled with PSTrace for Windows, or you can write your own MethodSCRIPT and control it from any platform or operating system.

    More information can be found through the link: https://www.palmsens.com/product/emstat4s/

    Read more
  • EmStatMUX8-R2

    With the EmStat3MUX8-R2 you can connect arrays or other setups made of up to eight working electrodes in two or three electrode cell types. If more channels are required, one or more MUX-R2 can be stacked to the EmStatMUX8-R2 for a total of up to 128 channels.

    The potentiostat is controlled as well as powered by USB and is used with PSTrace. The MUX8-R2 can sample different cells at a rate of 25 ms/cell. Usually a method needs to be finished to switch the cell but the fast sampling per cell makes it possible to measure time depending techniques, e.g. chronoamperometry, practically simultaneously. Via the script window of PSTrace it is also possible to perform a different experiment on each of the channels sequentially.

    More information can be found through the link: https://www.palmsens.com/product/emstatmux/

    Read more
  • Epsilon EClipse

    The Epsilon EClipse is the latest electrochemical analyzer manufactured by BASi. It is a potentiostat/galvanostat with a second working electrode for bipotentiostat measurements. Software with the most popular electrochemistry techniques is included with the instrument. 

    More information can be found through the link: https://www.basinc.com/epsilon/eclipse

    Read more
  • ER466 Integrated Potentiostat System

    The ER466 Integrated Potentiostat System is our most popular potentiostat model, being ideal for cyclic, linear sweep, and most analytical pulse voltammetric experiments, either in the research or teaching laboratory. It also functions as a galvanostat, ZRA (zero resistance ammeter), and high impedance voltmeter (electrometer). Connection to a computer is via a USB cable.

    More information can be found through the link: https://www.edaq.com/ER466

    Read more
  • ER467 High Current Potentiostat

    The ER467 Potentiostat System is ideal for cyclic, linear sweep, and most analytical pulse voltammetric experiments, either in the research or teaching laboratory. It also functions as a galvanostat, ZRA (zero resistance ammeter), and high impedance voltmeter (electrometer). Connection to a computer is via a USB cable.

    More information can be found through the link: https://www.edaq.com/ER467

    Read more
  • GX102 Potentiostat

    One of the smallest electrochemistry interface on the market. Compatible with most screen-printed electrodes. Part of the Super-compact series instruments. 

    These super small and affordable instruments enable you to develop applications tailored for your research needs. Super-compact series instruments are optimized for screen-printed sensor and biosensor applications but they can also be used in many other research areas, such as other electrochemical sensors, corrosion, battery and super-capacitors or fuel cells.

    Directly plug into an Android mobile device through OTG port for a true on-site analysis experience.

    Advanced PC software enables control of multiple units from same screen and at the same time, setting up parallel replicates and spools for a more customized multiplexing experience.

    Specifications
    • Operating mode                                              Potentiostat
    • Current resolution                                          0.002 % of current range (130 pA on lowest current range)
    • Maximum current                                           ±750 µA
    • Number of channels                                        2*
    • Electrochemical cell compatibility               WE, RE and CE; WE and RE/CE
    • Inputs/outputs                                                 Screen printed sensor interface options: 3×2.54mm, 4×2.54 mm or 3x 3.96 mm and more
       
    • Number of current ranges                              7 and Autorange
    • Number of current ranges remarks              6.5µA to 750 µA
    • Potential accuracy                                            ≤0.1%
    • Potential scan range                                        ±2 V*
    • Potential resolution                                         250 µV
    • PC interface                                                       USB-C
    • Android mobile device interface                   USB-C OTG
    • Multiplexibility                                                 Up to 256 devices, by SUITE software
    • PowerUSB;                                                         5VDC / 20 mA max
    • Dimensions                                                        (W/H/D)35 x 15 x 7 mm*
    • Weight of the instrument                                4 gr*

    *Specifications may vary depending on the model.

    More Information can be found through the link: https://galvanoplot.com/gx100-series/

    Read more
  • MPH 471 Universal Potentiostat

    The instrument enables measurement of amperometry, potentiometry and conductometry. Communication with the computer is provided via USB or Bluetooth. This hand-held device is equipped with GPS navigation so the measured data may be enhanced by the exact coordinates of the location where the measurement was made. Measured data can be stored and later processed in a PC because of the SD card slot incorporation. The ability to record a waveforms or integrate the measure values is enabled. Basic evaluation methods are also implemented – linear and non-linear calibration and standard addition method is available. The influence of the type of oxygen electrode membrane, temperature or gas solubility can be compensated for the measured values. The measured data are automatically recalculated and displayed in units of current, voltage, concentration (g∙L-1 or mol∙L-1) or saturation. Potentiometric measurement allows connection of pH electrodes and ISE.

    Key Properties

    • Up to 200 hours of battery life depending on the operating mode.
    • Excellent analytical tools (graphs, unit conversions, internal standard method for potentiometry, coulometric titration, 10 Henry’s constants for various redox active gases)
    • Power supply and data communication via USB, possibility of connection via Bluetooth
    • Data logging to memory card
    • Up to 5-point calibration for ISE and pH electrodes
    • Up to 4-point calibration of the conductivity cell makes it possible to compensate the non-linearity of the measurement
    • GPS equipment enables measurements in the field with location storage.
    • Calibration stored separately in the device (possibility of changing the memory card without having to recalibrate the device).
    • Possibility of separate calibration for 4 probes for amperometry and potentiometry
    • The possibility of using different temperature sensors (PT100, PT1000, Ni1000, ATC Monocrystals)
    • Advanced power management (display sleep and automatic device shutdown can be set according to the user’s preferences
    • DFS technology for accurate conductivity measurement
    • Powerful thirty-two-bit microprocessor for accurate measurement calculations

    More information can be found through the link: https://www.monokrystaly.cz/cs/ph-mv-ion-metry.html?fbclid=IwAR3ieir-mH-D10LZ-SZkrx74OHZYvOHjZPnOX8nfi9WdcwostsUgTAVaZPM#MPH471 

    Read more
  • MultiEmStat4

    Multi-channel Potentiostat / Galvanostat / Impedance Analyzer

    • Available with 8 or 12 channels
    • FRA / EIS: 10 μHz up to 200 kHz
    • Potential range: ±3 V (LR) or ±6 V (HR)
    • Max. current: ±30 mA (LR) or ±200 mA (HR)

    No Compromises on Productivity and Performance

    The MultiEmStat4 is a compact Potentiostat, Galvanostat, and optional Frequency Response Analyser (FRA) for Electrochemical Impedance Spectroscopy (EIS) with 8 or 12 channels. The MultiEmStat4 comes in two versions; the Low Range version is great for applications that require a low current range down to 1 nA, whereas the High Range version is very suitable for applications that need a maximum current of 200 mA.

    The MultiEmStat4 is controlled with MultiTrace for Windows, or you can write your own MethodSCRIPT and control it from any platform or operating system.

    Always a backup

    The MultiEmStat4 is equipped with 500 MB internal storage memory on each channel for storing your measurements as a backup. All internally stored measurements can be browsed and transferred back to the PC easily using the MultiTrace software. Your data is always with your instrument wherever you take it.

    Synchronizing channels in Synched mode

    By enabling synchronization of channels and adjusting the setup of your cables, you can use the MultiEmStat4 as a polypotentiostat. This means you can use multiple working electrodes, one counter and one reference electrode in the same cell at the same time. Your working electrodes all perform the same measurement.

    Specifications

    The MultiEmStat4M is available in two versions: the LR (Low Range) and HR (High Range) version.

    Main differences between the MultiEmStat4 Low and High Range
     
     
    Potential range ±3 V ±6 V
    Max. compliance voltage ±5 V ±8 V
    Current ranges 1 nA to 10 mA (8 ranges) 100 nA to 100 mA (7 ranges)
    Max. current ±30 mA ±200 mA
    Electrode connections WE, RE, CE and ground,
    2 mm banana plugs
    WE, RE, CE, Sense, and ground,
    2 mm banana plugs
    Hardware options
    • EIS up to 200 kHz
    • Galvanic Isolation
    • EIS up to 200 kHz
    • Galvanic Isolation

    More information can be found through the link: https://www.palmsens.com/product/multi-emstat4/

    Read more
  • MultiPalmSens4

    The MultiPalmSens4 is a flexible multi-channel potentiostat, galvanostat and impedance analyzer which you can fully tailor to your requirements and budget. The MultiTrace software allows for using each channel individually or simultaneously or running a sequence of automated tasks on each channel. Each channel provides an additional auxiliary port for controlling peripherals or monitoring temperature or other analog signals.

    More information can be found through the link: https://www.palmsens.com/product/multipalmsens4/

    Read more
  • PalmSens4

    The PalmSens4, is a USB and battery powered Potentiostat, Galvanostat, and optional a Frequency Response Analyser (FRA) for Electrochemical Impedance Spectroscopy (EIS). The PalmSens4 has a large potential range (-5V to 5V or -10V to 10V) and current range (100 pA to 10 mA) with a high resolution and low noise. The economical PalmSens4 is a complete laboratory instrument but its compact and rugged design makes it also ideal for field work. Connecting via Bluetooth guarantees a perfectly floating measurement.

    More information can be found through the link: https://www.palmsens.com/product/palmsens4/

    Read more
  • Sensit BT

    The Sensit BT is ideal for electrochemical sensor applications. The Sensit BT connects via Bluetooth to your smartphone or tablet and controlled via the Android app PStouch. You can use the USB-C port to charge the Sensit BT or connect to a classic USB port on your PC and control the Sensit BT via our PC software PSTrace

    The Sensit BT supports most common electrochemical techniques, including Cyclic Voltammetry, Square Wave Voltammetry and Impedance Spectroscopy (FRA/EIS). 

    More information can be found through the link: https://www.palmsens.com/product/sensit-bt/

    Read more