STP1.* Stoppers for Cells
Stoppers are formed from white PBTP (Polybutylenterephtalate). They are used for covering of the glass cells produced by BVT.
The system with the stopper is closed and space is prevent from solution evaporation.
| Model | Recommended Vessel | Termination |
| STP1.S | TC4, TC5, TC6 | Stopper for TC4, TC5, TC6 |
| STP1.1 | TC4, TC5, TC6 | Stopper with bubbling |
| STP1.2 | TC4, TC5, TC6 | Stopper with tubing |
| STP1.3 | TC4, TC5, TC6 | Middle stopper |
Related products
-
WI Wash Instrument for FC
Read moreWashing instrument for flow cells FC2, FC3 and FC4.
Flow cells FC2, FC3 and FC4 can be fouled by buffer salts, standard or sample substances especially in the tubing that brings measured liquid to the sensor.
The salts embed namely in the edges of drilled openings. It causes decrease of the flow area, thereby flow rate. These negative influences decrease the signal and measurement reliability. Most frequently it happens when high salt concentration solutions or solutions with impurities are used. The flows cell can be washed by pressured water using syringe.
