EmStat4S

The EmStat4S delivers desktop performance in the palm of your hand. The EmStat4S is a portable USB-powered Potentiostat, Galvanostat, and optional a Frequency Response Analyser (FRA) for Electrochemical Impedance Spectroscopy (EIS). The EmStat4S is controlled with PSTrace for Windows, or you can write your own MethodSCRIPT and control it from any platform or operating system.

More information can be found through the link: https://www.palmsens.com/product/emstat4s/

Versions

The EmStat4S comes in two different versions:

Low Range: for lower currents and potentials
High Range: for higher currents and potentials

Both versions can be configured with optional EIS/FRA with a maximum frequency of 200 kHz.

Main differences between the EmStat4S Low and High Range


Potential range	±3 V	±6 V
Max. compliance voltage

	±5 V	±8 V
Current ranges	1 nA to 10 mA (8 ranges)	100 nA to 100 mA (7 ranges)
Max. current	±30 mA	±200 mA
Electrode connections	WE, RE, CE and ground, 2 mm banana plugs	WE, RE, CE, Sense, and ground, 2 mm banana plugs

Standard included

A standard EmStat4S includes a rugged carrying case with:

EmStat4S
USB-C cable
Sensor cable: high quality, double-shielded cable with 2 mm banana connectors for Working, Counter, Reference electrode and Ground
4 or 5 crocodile clips
Dummy Cell
PSTrace software for Windows (on USB drive)
Manual (hardcopy)
Quick Start document
Calibration report

Category: PalmSens Potentiostats

Related products

MultiPalmSens4
Multi-channel Potentiostat / Galvanostat / Impedance Analyzer

4 to 10 channels available in different configurations

FRA / EIS: 10 μHz up to 1 MHz

9 current ranges: 100 pA to 10 mA

potential range: ±5 V or ±10 V

The MultiPalmSens4 is a flexible multi-channel potentiostat, galvanostat and impedance analyzer which you can fully tailor to your requirements and budget. The MultiTrace software allows for using each channel individually or simultaneously or running a sequence of automated tasks on each channel. Each channel provides an additional auxiliary port for controlling peripherals or monitoring temperature or other analog signals.

More information can be found through the link: https://www.palmsens.com/product/multipalmsens4/

Configure your ideal multi-channel potentiostat

Each channel can be configured with:

±5 V or ±10 V maximum potential range

EIS/FRA with maximum frequency of 100 kHz or 1 MHz

Bipotentiostat module for second WE

iR-Compensation

Galvanic isolation

Always a backup

Every channel of the MultiPalmSens4 is equipped with 8 GB storage space. This means all your measurements^* can automatically be saved on-board as backup.
Measurements can be browsed and transferred to the PC easily using the MultiTrace software for Windows.

Synchronizing channels in Synched mode

By enabling synchronization of channels and adjusting the setup of your cables, you can use the MultiPalmSens4 as a polypotentiostat. This means you can use multiple working electrodes, one counter and one reference electrode in the same cell at the same time. Your working electrodes all perform the same measurement.
Read more

MUX8-R2 Multiplexer

Multiplexer for 8 up to 128 cells

Automatically switch between electrochemical cells
Easy stacking with magnetic feet and top
4 different electrode or sensor configurations
Daisy chain multiplexers, up to 128 channels!

The PalmSens series and the EmStat4X can be used to work with multiple working electrodes or a sensor array by means of a multiplexer.

The multiplexer switches between the working electrodes in the range of milliseconds.

each MUX8-R2 multiplexer enables to work with up to eight 2- or 3- electrode systems.
daisy chaining multiple MUX8-R2 boards (expansion up to 128 channels)
all hardware settings are controlled by the software making it unnecessary to flick a physical switch
LEDs to show which channel is selected
allows to connect auxiliary input (like temperature sensor)

More information can be found through the link: https://www.palmsens.com/product/mux8-r2/

Connection options

The most selected connection option uses two double shielded D-Sub cables ending in 2 mm banana plugs. As alternatives we can provide a PCB with screw terminals, D-Sub cable ending in ferrules or Screen Printed Electrode Adapter. Each of these cables can be connected to 4 channels, if all 8 channels are used, two cables are needed.

Specifications

System
number of channels	8 (up to 128 when daisy chained)
multiplexer	switches 8 x (WE, S, RE and CE)
on resistance for WE	1.5 ohm typical
charge injection on WE	20 pC typical
leakage current	< 55 pA (30 pA typical) at 25 ºC
switching time	2 ms
compliance voltage

Other
	± 10 V
housing	aluminium: 138 mm x 121 mm x 37 mm
weight	+/- 500 g
temperature range	0 ºC to + 50 ºC
power supply	USB

The MUX8-R2 has the following connectors:

Connector	Function
Input	Y-cable connects to both potentiostat sensor connector and (digital) AUX
AUX	Can be used to measure auxiliary input like temperature or pH, and to switch external hardware using two digital control lines that can be set in PSTrace
Link	Connects to Input of next multiplexer, for daisy-chaining multiple multiplexers
USB-C	Input for extra power when ≥3 multiplexers are daisy-chained
Channel 1-4	Connects to sensor cables 1-4
Channel 5-8	Connects to sensor cables 5-8

EmStat4R

The EmStat4R delivers desktop performance in a rugged enclosure. The EmStat4R is a portable Battery or USB-powered Potentiostat, Galvanostat, and optional a Frequency Response Analyzer (FRA) for Electrochemical Impedance Spectroscopy (EIS).

The EmStat4R is great for applications that require low currents, from 30 mA down to picoamps, such as sensor applications. The EmStat4R is controlled with PSTrace for Windows, the Android app PStouch, or you can write your own MethodSCRIPT and control it from any platform or operating system.

More information can be found through the link: https://www.palmsens.com/product/emstat4r/

Portable: battery, Bluetooth and rugged housing
Available with connection module for sensor cable or SPE
Potential range ±3 V
Max. current ±30 mA
Optional impedance analyzer: 10 μHz up to 200 kHz

Two versions

The EmStat4R is available with a cell cable or SPE connection module. Both versions can be configured with optional EIS/FRA with a maximum frequency of 200 kHz. See specifications for more information.

EmStat4R SNS		EmStat4R SPE

Connection module	Cell cable	Connection module	Screen-printed-electrode
Cell cable included	Yes	Cell cable included	No
Electrode connections	WE, RE, CE and ground	Electrode connections	RE, WE, CE
Connectors	2 mm banana	Sensor pitch	2.54 mm
		Maximum sensor width	11 mm
		Allowed sensor thickness	Between 0.1 mm and 0.8 mm

Always a backup

The EmStat4R is equipped with 500 MB internal storage memory for storing your measurements as a backup. All internally stored measurements can be browsed and transferred back to the PC easily using the PSTrace software for Windows. Your data is always with your instrument wherever you take it.

Standard included

A standard EmStat4R includes a rugged carrying case with:

EmStat4R
Rugged case
USB-C cable
Cell cable: high quality, double-shielded cable with 2 mm banana connectors for Working, Counter, Reference electrode and Ground
4 crocodile clips
Dummy Cell
PSTrace software for Windows (on USB drive)
Manual (hardcopy)
Quick Start document
Calibration report
Three year warranty

MultiEmStat4

The MultiEmStat4 is a compact Potentiostat, Galvanostat, and optional Frequency Response Analyser (FRA) for Electrochemical Impedance Spectroscopy (EIS) with 8 or 12 channels. The MultiEmStat4 comes in two versions; the Low Range version is great for applications that require a low current range down to 1 nA, whereas the High Range version is very suitable for applications that need a maximum current of 200 mA.

The MultiEmStat4 is controlled with MultiTrace for Windows, or you can write your own MethodSCRIPT and control it from any platform or operating system.

Available with 8 or 12 channels
FRA / EIS: 10 μHz up to 200 kHz
Potential range: ±3 V (LR) or ±6 V (HR)
Max. current: ±30 mA (LR) or ±200 mA (HR)

More information can be found through the link: https://www.palmsens.com/product/multi-emstat4/

Always a backup

The MultiEmStat4 is equipped with 500 MB internal storage memory on each channel for storing your measurements as a backup. All internally stored measurements can be browsed and transferred back to the PC easily using the MultiTrace software. Your data is always with your instrument wherever you take it.

Synchronizing channels in Synched mode

By enabling synchronization of channels and adjusting the setup of your cables, you can use the MultiEmStat4 as a polypotentiostat. This means you can use multiple working electrodes, one counter and one reference electrode in the same cell at the same time. Your working electrodes all perform the same measurement.