Category

Category

MultiPalmSens4

Multi-channel Potentiostat / Galvanostat / Impedance Analyzer

  • 4 to 10 channels available in different configurations
  • FRA / EIS: 10 μHz up to  1 MHz
  • 9 current ranges: 100 pA to 10 mA
  • potential range: ±5 V or  ±10 V

 

The MultiPalmSens4 is a flexible multi-channel potentiostat, galvanostat and impedance analyzer which you can fully tailor to your requirements and budget. The MultiTrace software allows for using each channel individually or simultaneously or running a sequence of automated tasks on each channel. Each channel provides an additional auxiliary port for controlling peripherals or monitoring temperature or other analog signals.

 

More information can be found through the link: https://www.palmsens.com/product/multipalmsens4/

 

Configure your ideal multi-channel potentiostat

Each channel can be configured with:

  • ±5 V or ±10 V maximum potential range
  • EIS/FRA with maximum frequency of 100 kHz or 1 MHz
  • Bipotentiostat module for second WE
  • iR-Compensation
  • Galvanic isolation

 

Always a backup

Every channel of the MultiPalmSens4 is equipped with 8 GB storage space. This means all your measurements* can automatically be saved on-board as backup.
Measurements can be browsed and transferred to the PC easily using the MultiTrace software for Windows.

 

Synchronizing channels in Synched mode

By enabling synchronization of channels and adjusting the setup of your cables, you can use the MultiPalmSens4 as a polypotentiostat. This means you can use multiple working electrodes, one counter and one reference electrode in the same cell at the same time. Your working electrodes all perform the same measurement.

 

 

Category:

Related products

  • MultiEmStat4

    The MultiEmStat4 is a compact Potentiostat, Galvanostat, and optional Frequency Response Analyser (FRA) for Electrochemical Impedance Spectroscopy (EIS) with 8 or 12 channels. The MultiEmStat4 comes in two versions; the Low Range version is great for applications that require a low current range down to 1 nA, whereas the High Range version is very suitable for applications that need a maximum current of 200 mA.

    The MultiEmStat4 is controlled with MultiTrace for Windows, or you can write your own MethodSCRIPT and control it from any platform or operating system.

     

    • Available with 8 or 12 channels
    • FRA / EIS: 10 μHz up to 200 kHz
    • Potential range: ±3 V (LR) or ±6 V (HR)
    • Max. current: ±30 mA (LR) or ±200 mA (HR)

     

    More information can be found through the link: https://www.palmsens.com/product/multi-emstat4/

     

    Always a backup

    The MultiEmStat4 is equipped with 500 MB internal storage memory on each channel for storing your measurements as a backup. All internally stored measurements can be browsed and transferred back to the PC easily using the MultiTrace software. Your data is always with your instrument wherever you take it.

     

    Synchronizing channels in Synched mode

    By enabling synchronization of channels and adjusting the setup of your cables, you can use the MultiEmStat4 as a polypotentiostat. This means you can use multiple working electrodes, one counter and one reference electrode in the same cell at the same time. Your working electrodes all perform the same measurement.

     

    Specifications

    The MultiEmStat4M is available in two versions: the LR (Low Range) and HR (High Range) version.

    Main differences between the MultiEmStat4 Low and High Range
     
     
    Potential range ±3 V ±6 V
    Max. compliance voltage ±5 V ±8 V
    Current ranges 1 nA to 10 mA (8 ranges) 100 nA to 100 mA (7 ranges)
    Max. current ±30 mA ±200 mA
    Electrode connections WE, RE, CE and ground,
    2 mm banana plugs    		 WE, RE, CE, Sense, and ground,
    2 mm banana plugs
    Hardware options
    • EIS up to 200 kHz
    • Galvanic Isolation
    • EIS up to 200 kHz
    • Galvanic Isolation

     

    Read more

  • EmStat4X

    The EmStat4X delivers high performance in a small footprint. The EmStat4X is a small battery and USB-powered Potentiostat, Galvanostat, and optional Frequency Response Analyser (FRA) for Electrochemical Impedance Spectroscopy (EIS).

    The EmStat4X Low Range (LR) version is great for applications that require measuring low currents down to picoamps, like (bio)sensor research. The High Range (HR) version is very suitable for applications that need a maximum current of up to 200 mA. The EmStat4X is controlled with PSTrace for Windows, or you can write your own MethodSCRIPT and control it from any platform or operating system.

     

    More information can be found through the link: https://www.palmsens.com/product/emstat4s/

     

    The EmStat4X LR and HR features include:

    • Fast EIS support: for running fixed-frequency EIS measurements at a very low interval of around 1 ms.
    • Auxiliary Port: for connecting to a MUX8-R2 multiplexer, temperature sensor, pH sensor, stirrer control, triggering and more.
    • iR compensation: to compensate for the iR drop between the Reference electrode and the outside of the double layer of the electrochemical cell.
    • Bluetooth: for a wireless connection to a PC, smartphone or tablet
    • 11.1 Wh battery: for more than 8 hours of continuous measurements (typical with the LR).
    • Small borderless display: showing the state of the battery and connectivity.

    Two versions

    The EmStat4X comes in two different versions:

    • Low Range: for lower currents and potentials (±30 mA / ±3 V applied / ±5 V compliance)
    • High Range: for higher currents and potentials (±200 mA / ±6 V applied / ±8 V compliance)

    Both versions can be configured with optional EIS/FRA up to 200 kHz.
    See specifications for a detailed comparison between the LR and HR.

     

    Always a backup

    The EmStat4X is equipped with 500 MB internal storage memory for storing your measurements as a backup. All internally stored measurements can be browsed and transferred back to the PC easily using the PSTrace software for Windows. Your data is always with your instrument wherever you take it.

     

    Standard included

    A standard EmStat4X includes a rugged carrying case with:

    • EmStat4X LR or HR
    • USB-C cable
    • Cell cable: high quality, double-shielded cable with 2 mm banana connectors for Working, Counter, Reference electrode and Ground, 1 meter long
    • 4 or 5 crocodile clips
    • Dummy Cell

    Also included:

    • PSTrace software for Windows (on USB drive)
    • Manual (hardcopy)
    • Quick Start (hardcopy)
    • Calibration report
    Read more

  • Sensit BT

    Handheld and wireless dual-channel potentiostat

    • Capable of EIS up to 200 kHz
    • Built around the EmStat Pico module
    • Potential range -1.7 to +2 V
    • Current ranges 100 nA – 5 mA (max ±3 mA)
    • Can be used without PC or smartphone connection

     

    The Sensit BT is ideal for electrochemical sensor applications. The Sensit BT connects via Bluetooth to your smartphone or tablet and controlled via the Android app PStouch. You can use the USB-C port to charge the Sensit BT or connect to a classic USB port on your PC and control the Sensit BT via our PC software PSTrace. 

    The Sensit BT supports most common electrochemical techniques, including Cyclic Voltammetry, Square Wave Voltammetry and Impedance Spectroscopy (FRA/EIS). 

     

    More information can be found through the link: https://www.palmsens.com/product/sensit-bt/

     

    Two versions:

    Sensit BT.SPE Sensit BT.SNS

    Sensor pitch 2.54 mm Cable length 40 cm
    Electrode connections RE, WE, CE Connectors 2 mm banana
    Allowed sensor thickness Between 0.1 mm and 0.8 mm Electrode connections RE, WE, WE2, CE
    Maximum sensor width 11 mm  

     

    Dual-channel and Bipotentiostat

    The Sensit BT.SPE can be used for running sequential measurements on two different Screen-Printed Electrodes (SPE’s) each with their own Reference, Counter and Working electrodes.

    The second channel can also be used in Bipotentiostat mode, functioning as second Working Electrode versus the Reference and Counter electrode of channel 1. Both working electrodes are recorded simultaneously in the Bipotentiostat mode.

    The Sensit BT.SNS has a lead connected to the WE of channel 2 and can be used out-of-the-box for BiPotentiostat measurements.

     

    On-board data storage

    The Sensit BT is equipped with 500 MB internal storage memory.

    Save measurements on-board as a backup. Or pre-program the device with a script and use the trigger button to run and store measurements: no need to connect a PC or smartphone. Browse and transfer all internally stored measurements back to the PC easily using PSTrace for Windows.

    Read more

  • EmStat4S

    The EmStat4S delivers desktop performance in the palm of your hand. The EmStat4S is a portable USB-powered Potentiostat, Galvanostat, and optional a Frequency Response Analyser (FRA) for Electrochemical Impedance Spectroscopy (EIS). The EmStat4S is controlled with PSTrace for Windows, or you can write your own MethodSCRIPT and control it from any platform or operating system.

     

    More information can be found through the link: https://www.palmsens.com/product/emstat4s/

     

    Versions

    The EmStat4S comes in two different versions:

    • Low Range: for lower currents and potentials
    • High Range: for higher currents and potentials

    Both versions can be configured with optional EIS/FRA with a maximum frequency of 200 kHz.

    Main differences between the EmStat4S Low and High Range
     
     
    Potential range ±3 V ±6 V
    Max.

    compliance voltage

     
     
     
    		 ±5 V ±8 V
    Current ranges 1 nA to 10 mA (8 ranges) 100 nA to 100 mA (7 ranges)
    Max. current ±30 mA ±200 mA
    Electrode connections WE, RE, CE and ground,
    2 mm banana plugs    		 WE, RE, CE, Sense, and ground,
    2 mm banana plugs

     

    Standard included

    A standard EmStat4S includes a rugged carrying case with:

    • EmStat4S
    • USB-C cable
    • Sensor cable: high quality, double-shielded cable with 2 mm banana connectors for Working, Counter, Reference electrode and Ground
    • 4 or 5 crocodile clips
    • Dummy Cell
    • PSTrace software for Windows (on USB drive)
    • Manual (hardcopy)
    • Quick Start document
    • Calibration report

     

     

     

    Read more