Category

Category

Sensit Smart

Smartphone potentiostat

  • Capable of EIS up to 200 kHz
  • Built around the EmStat Pico module
  • Potential range -1.7 to +2 V
  • Current ranges 100 nA – 5 mA (max ±3 mA)

 

The Sensit Smart can be directly inserted in a smartphone or tablet and controlled via the Android app PStouch. You can use the USB-C Female to USB-A cable to connect the Sensit Smart to a classic USB port on your PC and control the Sensit Smart via our PC software PSTrace. 

The Sensit Smart supports most common electrochemical techniques, including Cyclic Voltammetry, Square Wave Voltammetry and Impedance Spectroscopy (FRA/EIS).

 

More information can be found through the link: https://www.palmsens.com/product/sensit-smart/

 

The Sensit Smart comes with:

  • Dummy Cell (SPE version)
  • SPE to screw-terminal adapter
  • USB-C Female to USB-A cable
  • USB-C Female to Micro USB adapter
  • USB-C Extension cable
  • USB-C port protector
  • PSTrace software for Windows (activation code for my.palmsens.com)
  • PStouch app for Android (find it in the Google Play Store)

 

Compatible with most common Screen Printed Electrodes / Sensors
Sensor pitch: 2.54 mm
Electrode connections: RE, WE, CE
Allowed sensor thickness: Between 0.1 mm and 0.8 mm
Maximum sensor width: 11 mm

 

Category:

Related products

  • Sensit BT

    Handheld and wireless dual-channel potentiostat

    • Capable of EIS up to 200 kHz
    • Built around the EmStat Pico module
    • Potential range -1.7 to +2 V
    • Current ranges 100 nA – 5 mA (max ±3 mA)
    • Can be used without PC or smartphone connection

     

    The Sensit BT is ideal for electrochemical sensor applications. The Sensit BT connects via Bluetooth to your smartphone or tablet and controlled via the Android app PStouch. You can use the USB-C port to charge the Sensit BT or connect to a classic USB port on your PC and control the Sensit BT via our PC software PSTrace. 

    The Sensit BT supports most common electrochemical techniques, including Cyclic Voltammetry, Square Wave Voltammetry and Impedance Spectroscopy (FRA/EIS). 

     

    More information can be found through the link: https://www.palmsens.com/product/sensit-bt/

     

    Two versions:

    Sensit BT.SPE Sensit BT.SNS

    Sensor pitch 2.54 mm Cable length 40 cm
    Electrode connections RE, WE, CE Connectors 2 mm banana
    Allowed sensor thickness Between 0.1 mm and 0.8 mm Electrode connections RE, WE, WE2, CE
    Maximum sensor width 11 mm  

     

    Dual-channel and Bipotentiostat

    The Sensit BT.SPE can be used for running sequential measurements on two different Screen-Printed Electrodes (SPE’s) each with their own Reference, Counter and Working electrodes.

    The second channel can also be used in Bipotentiostat mode, functioning as second Working Electrode versus the Reference and Counter electrode of channel 1. Both working electrodes are recorded simultaneously in the Bipotentiostat mode.

    The Sensit BT.SNS has a lead connected to the WE of channel 2 and can be used out-of-the-box for BiPotentiostat measurements.

     

    On-board data storage

    The Sensit BT is equipped with 500 MB internal storage memory.

    Save measurements on-board as a backup. Or pre-program the device with a script and use the trigger button to run and store measurements: no need to connect a PC or smartphone. Browse and transfer all internally stored measurements back to the PC easily using PSTrace for Windows.

    Read more

  • EmStatMUX8-R2

    USB powered potentiostat with integrated multiplexer

    • potentiostat with integrated 8 channel multiplexer
    • potential range: ± 3V or ± 4V
    • compliance voltage: ± 5V or ± 8V
    • current ranges:  1 nA – 100 mA
    • maximum current: ± 100 mA

     

    With the EmStat3MUX8-R2 you can connect arrays or other setups made of up to eight working electrodes in two or three electrode cell types. If more channels are required, one or more MUX-R2 can be stacked to the EmStatMUX8-R2 for a total of up to 128 channels.

     

    The potentiostat is controlled as well as powered by USB and is used with PSTrace. The MUX8-R2 can sample different cells at a rate of 25 ms/cell. Usually a method needs to be finished to switch the cell but the fast sampling per cell makes it possible to measure time depending techniques, e.g. chronoamperometry, practically simultaneously. Via the script window of PSTrace it is also possible to perform a different experiment on each of the channels sequentially.

     

    More information can be found through the link: https://www.palmsens.com/product/emstatmux/

     

    Specifications

    With EmStat potentiostat version
      3 3+

    dc-potential range

     
     
     
    		 ± 3.000 V ± 4.000 V

    compliance voltage

     
     
     
    		 ± 5 V ± 8 V
    dc-potential resolution 0.1 mV 0.125 mV
    dc-potential accuracy 0.2 % 0.3 %

    current ranges

     
     
     
    		 1 nA to 10 mA (8 ranges) 1 nA to 100 mA (9 ranges)
    maximum current ± 20 mA typical
    and ± 15 mA minimum    		 ± 100 mA typical

    The current is measured using a zero resistance ammeter (ZRA).

     

    Cell connections

    There are four ways to connect your sensor. These sensor connections are quoted separately. 

    • Option A: Double shielded sensor cables with 2 mm banana connectors. The 2 mm banana connectors are compatible with standard croc clips (they will be included in the quotation as optional).
    • Option B: High-density cable that terminates in ferrules
    • Option C: Connection (Screw) Terminal  to assemble your own wires.
    • Option D: Screen Printed Electrode Connector

    Each of these connection options can be used to connect 4 channels. When you add the EmStatMUX8 in the quotation basket we will make sure to include two units of the selected connection option so you can connect all 8 channels to the electrochemical cells. 

    Read more

  • EmStat4X

    The EmStat4X delivers high performance in a small footprint. The EmStat4X is a small battery and USB-powered Potentiostat, Galvanostat, and optional Frequency Response Analyser (FRA) for Electrochemical Impedance Spectroscopy (EIS).

    The EmStat4X Low Range (LR) version is great for applications that require measuring low currents down to picoamps, like (bio)sensor research. The High Range (HR) version is very suitable for applications that need a maximum current of up to 200 mA. The EmStat4X is controlled with PSTrace for Windows, or you can write your own MethodSCRIPT and control it from any platform or operating system.

     

    More information can be found through the link: https://www.palmsens.com/product/emstat4s/

     

    The EmStat4X LR and HR features include:

    • Fast EIS support: for running fixed-frequency EIS measurements at a very low interval of around 1 ms.
    • Auxiliary Port: for connecting to a MUX8-R2 multiplexer, temperature sensor, pH sensor, stirrer control, triggering and more.
    • iR compensation: to compensate for the iR drop between the Reference electrode and the outside of the double layer of the electrochemical cell.
    • Bluetooth: for a wireless connection to a PC, smartphone or tablet
    • 11.1 Wh battery: for more than 8 hours of continuous measurements (typical with the LR).
    • Small borderless display: showing the state of the battery and connectivity.

    Two versions

    The EmStat4X comes in two different versions:

    • Low Range: for lower currents and potentials (±30 mA / ±3 V applied / ±5 V compliance)
    • High Range: for higher currents and potentials (±200 mA / ±6 V applied / ±8 V compliance)

    Both versions can be configured with optional EIS/FRA up to 200 kHz.
    See specifications for a detailed comparison between the LR and HR.

     

    Always a backup

    The EmStat4X is equipped with 500 MB internal storage memory for storing your measurements as a backup. All internally stored measurements can be browsed and transferred back to the PC easily using the PSTrace software for Windows. Your data is always with your instrument wherever you take it.

     

    Standard included

    A standard EmStat4X includes a rugged carrying case with:

    • EmStat4X LR or HR
    • USB-C cable
    • Cell cable: high quality, double-shielded cable with 2 mm banana connectors for Working, Counter, Reference electrode and Ground, 1 meter long
    • 4 or 5 crocodile clips
    • Dummy Cell

    Also included:

    • PSTrace software for Windows (on USB drive)
    • Manual (hardcopy)
    • Quick Start (hardcopy)
    • Calibration report
    Read more

  • PalmSens4

    The PalmSens4, is a USB and battery powered Potentiostat, Galvanostat, and optional a Frequency Response Analyser (FRA) for Electrochemical Impedance Spectroscopy (EIS).

     

    Compact, versatile and powerful

    • (Bi)Potentiostat / Galvanostat / Impedance Analyzer
    • FRA / EIS: 10 μHz up to  1 MHz
    • 9 current ranges: 100 pA to 10 mA
    • 18-bit resolution
    • Bluetooth or USB connection

     

    The PalmSens4 has a large potential range (-5V to 5V or -10V to 10V) and current range (100 pA to 10 mA) with a high resolution and low noise. The economical PalmSens4 is a complete laboratory instrument but its compact and rugged design makes it also ideal for field work.

    Connecting via Bluetooth guarantees a perfectly floating measurement.

     

    More information can be found through the link: https://www.palmsens.com/product/palmsens4/

     

    Configurable

    PalmSens4 comes in different configurations:

    • ±5 V or ±10 V potential range
    • EIS/FRA with maximum frequency of 100 kHz or 1 MHz
    • optional BiPotentiostat module for second WE
    • optional iR-Compensation

    Standard included

    • Rugged carrying case
    • High quality, double shielded cell cable with
      2 mm banana connectors for Working, Counter, Reference electrode and Ground
    • Crocodile clips
    • Dummy cell
    • USB cable
    • Manual and Quick Start document
    • PSTrace software for Windows

     

     
    Read more