PalmSens4

Related products

• 

  EmStat4S

  The EmStat4S delivers desktop performance in the palm of your hand. The EmStat4S is a portable USB-powered Potentiostat, Galvanostat, and optional a Frequency Response Analyser (FRA) for Electrochemical Impedance Spectroscopy (EIS). The EmStat4S is controlled with PSTrace for Windows, or you can write your own MethodSCRIPT and control it from any platform or operating system.

   

  More information can be found through the link: https://www.palmsens.com/product/emstat4s/

   

  Versions

  The EmStat4S comes in two different versions:

  • Low Range: for lower currents and potentials
  • High Range: for higher currents and potentials

  Both versions can be configured with optional EIS/FRA with a maximum frequency of 200 kHz.

  Main differences between the EmStat4S Low and High Range
  Potential range	±3 V	±6 V
  Max. compliance voltage

  	±5 V	±8 V
  Current ranges	1 nA to 10 mA (8 ranges)	100 nA to 100 mA (7 ranges)
  Max. current	±30 mA	±200 mA
  Electrode connections	WE, RE, CE and ground, 2 mm banana plugs	WE, RE, CE, Sense, and ground, 2 mm banana plugs

   

  Standard included

  A standard EmStat4S includes a rugged carrying case with:

  

  • EmStat4S
  • USB-C cable
  • Sensor cable: high quality, double-shielded cable with 2 mm banana connectors for Working, Counter, Reference electrode and Ground
  • 4 or 5 crocodile clips
  • Dummy Cell
  • PSTrace software for Windows (on USB drive)
  • Manual (hardcopy)
  • Quick Start document
  • Calibration report

   

   

   

  Read more
• 

  EmStat4X

  The EmStat4X delivers high performance in a small footprint. The EmStat4X is a small battery and USB-powered Potentiostat, Galvanostat, and optional Frequency Response Analyser (FRA) for Electrochemical Impedance Spectroscopy (EIS).

  The EmStat4X Low Range (LR) version is great for applications that require measuring low currents down to picoamps, like (bio)sensor research. The High Range (HR) version is very suitable for applications that need a maximum current of up to 200 mA. The EmStat4X is controlled with PSTrace for Windows, or you can write your own MethodSCRIPT and control it from any platform or operating system.

   

  More information can be found through the link: https://www.palmsens.com/product/emstat4s/

   

  The EmStat4X LR and HR features include:

  • Fast EIS support: for running fixed-frequency EIS measurements at a very low interval of around 1 ms.
  • Auxiliary Port: for connecting to a MUX8-R2 multiplexer, temperature sensor, pH sensor, stirrer control, triggering and more.
  • iR compensation: to compensate for the iR drop between the Reference electrode and the outside of the double layer of the electrochemical cell.
  • Bluetooth: for a wireless connection to a PC, smartphone or tablet
  • 11.1 Wh battery: for more than 8 hours of continuous measurements (typical with the LR).
  • Small borderless display: showing the state of the battery and connectivity.

  Two versions

  The EmStat4X comes in two different versions:

  • Low Range: for lower currents and potentials (±30 mA / ±3 V applied / ±5 V compliance)
  • High Range: for higher currents and potentials (±200 mA / ±6 V applied / ±8 V compliance)

  Both versions can be configured with optional EIS/FRA up to 200 kHz.
  See specifications for a detailed comparison between the LR and HR.

   

  Always a backup

  The EmStat4X is equipped with 500 MB internal storage memory for storing your measurements as a backup. All internally stored measurements can be browsed and transferred back to the PC easily using the PSTrace software for Windows. Your data is always with your instrument wherever you take it.

   

  Standard included

  A standard EmStat4X includes a rugged carrying case with:

  • EmStat4X LR or HR
  • USB-C cable
  • Cell cable: high quality, double-shielded cable with 2 mm banana connectors for Working, Counter, Reference electrode and Ground, 1 meter long
  • 4 or 5 crocodile clips
  • Dummy Cell

  Also included:

  • PSTrace software for Windows (on USB drive)
  • Manual (hardcopy)
  • Quick Start (hardcopy)
  • Calibration report

  Read more
• 

  MultiPalmSens4

  Multi-channel Potentiostat / Galvanostat / Impedance Analyzer

  • 4 to 10 channels available in different configurations
  • FRA / EIS: 10 μHz up to  1 MHz
  • 9 current ranges: 100 pA to 10 mA
  • potential range: ±5 V or  ±10 V

   

  The MultiPalmSens4 is a flexible multi-channel potentiostat, galvanostat and impedance analyzer which you can fully tailor to your requirements and budget. The MultiTrace software allows for using each channel individually or simultaneously or running a sequence of automated tasks on each channel. Each channel provides an additional auxiliary port for controlling peripherals or monitoring temperature or other analog signals.

   

  More information can be found through the link: https://www.palmsens.com/product/multipalmsens4/

   

  Configure your ideal multi-channel potentiostat

  Each channel can be configured with:

  • ±5 V or ±10 V maximum potential range
  • EIS/FRA with maximum frequency of 100 kHz or 1 MHz
  • Bipotentiostat module for second WE
  • iR-Compensation
  • Galvanic isolation

   

  Always a backup

  Every channel of the MultiPalmSens4 is equipped with 8 GB storage space. This means all your measurements^* can automatically be saved on-board as backup.
  Measurements can be browsed and transferred to the PC easily using the MultiTrace software for Windows.

   

  Synchronizing channels in Synched mode

  By enabling synchronization of channels and adjusting the setup of your cables, you can use the MultiPalmSens4 as a polypotentiostat. This means you can use multiple working electrodes, one counter and one reference electrode in the same cell at the same time. Your working electrodes all perform the same measurement.

   

   

  Read more
• 

  MultiEmStat4

  The MultiEmStat4 is a compact Potentiostat, Galvanostat, and optional Frequency Response Analyser (FRA) for Electrochemical Impedance Spectroscopy (EIS) with 8 or 12 channels. The MultiEmStat4 comes in two versions; the Low Range version is great for applications that require a low current range down to 1 nA, whereas the High Range version is very suitable for applications that need a maximum current of 200 mA.

  The MultiEmStat4 is controlled with MultiTrace for Windows, or you can write your own MethodSCRIPT and control it from any platform or operating system.

   

  • Available with 8 or 12 channels
  • FRA / EIS: 10 μHz up to 200 kHz
  • Potential range: ±3 V (LR) or ±6 V (HR)
  • Max. current: ±30 mA (LR) or ±200 mA (HR)

   

  More information can be found through the link: https://www.palmsens.com/product/multi-emstat4/

   

  Always a backup

  The MultiEmStat4 is equipped with 500 MB internal storage memory on each channel for storing your measurements as a backup. All internally stored measurements can be browsed and transferred back to the PC easily using the MultiTrace software. Your data is always with your instrument wherever you take it.

   

  Synchronizing channels in Synched mode

  By enabling synchronization of channels and adjusting the setup of your cables, you can use the MultiEmStat4 as a polypotentiostat. This means you can use multiple working electrodes, one counter and one reference electrode in the same cell at the same time. Your working electrodes all perform the same measurement.

   

  Specifications

  The MultiEmStat4M is available in two versions: the LR (Low Range) and HR (High Range) version.

  Main differences between the MultiEmStat4 Low and High Range
  Potential range	±3 V	±6 V
  Max. compliance voltage	±5 V	±8 V
  Current ranges	1 nA to 10 mA (8 ranges)	100 nA to 100 mA (7 ranges)
  Max. current	±30 mA	±200 mA
  Electrode connections	WE, RE, CE and ground, 2 mm banana plugs	WE, RE, CE, Sense, and ground, 2 mm banana plugs
  Hardware options	EIS up to 200 kHz Galvanic Isolation	EIS up to 200 kHz Galvanic Isolation

   

  Read more