Category

Category

Metal Wire Auxiliary Electrode – 50HX15 0.6/250 mm (redox.me)

The metal wire counter (auxiliary) electrode is provided in the electrochemical cell as a current sink to shunt excess current away from the reference electrode. The counter electrode is generally chosen to be inert under reaction conditions, typically platinum, rhodium, palladium, or gold wire. It well fits aqueous (FKM O-Ring) and organic solvent (FFKM O-Ring) electrolyte requirements.

 

Application note
The metal wire electrode is immersed in the ion-conducting solution as a counter electrode. An electric current is passed between the working electrode and the counter electrode for a certain amount of time. After the process, the electrode should be washed several times with isopropanol or ethanol and dried under the nitrogen flow. Store the metal wire electrode in the glass vial sealed with O-rings (all included in the package).

 

Specification
helix inner diameter: 4.8 mm
helix outer diameter: 6 mm
number of turns: 12
wire diameter: 0.6 mm
total wire length: 250 mm (215 mm long helix, 35 mm long straight wire)

 

Intrastat data
HS Code: 71101910 (platinum), 71081310 (gold),
Country of Origin: Sweden
NET weight: 100 g

 

Product includes
1 metal wire electrode with PEEK plug and selected electrical connector
1 O-Ring
1 glass vial

Select configuration

 
 
Material: platinum 99.9% / gold
 
Electrical connector: 1 mm dia. gold plated pin / 4 mm female banana socket
 
 
Categories: ,

Related products

  • 8/16-Channel Potentiostat for High Resolution Data Logger

    The device consists of a combination of an multi-channel potentiostat/converter (BVT Technologies) and an external USB Pico ADC high resolution data logger (Pico Technology).

     

    The data logger can be supplied in two versions: ADC-20 (20 bits, 8 channels) or ADC-24 (24 bits, 16 channels). For detailed specifications, see the attachment at the end of the document. The device allows measurements from up to 8 or from up to 16 independent channels. The basic output signal is a voltage in the range of -2.5 to 2.5 V. All channels are programmable (the output can be concentration, temperature, pressure…).

     

    After connecting the device to a PC with Pico Technology’s Picolog 6 measurement program installed, the voltage [V] can be processed using math channels and directly recorded in real time as temperature, current, resistance, frequency, % and pressure, see measurement example at the end of the document.

     

    For temperature measurement, the device is compatible with resistance thermometers (Ni 1000, Ni 5000, Pt 1000. Power is provided via USB-B, the maximum electrical consumption of the device is 500 mA.

     

    Device Usage

    • Temperature measurement with different temperature sensor (resistance thermometers Ni 1000, ni 5000, Pt 1000)
    • Voltage measurement
    • Conductivity and resistance measurement
    • Amperometry measurement

     

     

    * For this product, we recommend our customers use the Training Service from BVT.

    (https://bvt.cz/produkt/offer-of-long-term-automated-measurements-on-bvt-apparatus/)

    Read more

  • Modular PEM Electrolyzer Test Station up to 3 kW (redox.me)

    The Modular PEM Electrolyzer Test Station is a versatile and flexible solution designed for the testing and evaluation of proton exchange membrane (PEM) electrolyzers. Unlike fully automated, integrated systems, this platform features modular components that can be easily swapped by the end user, allowing for customized setups and adaptability to different testing needs. The platform is engineered to provide precise control and measurement of electrochemical performance while offering the convenience of easily replaceable parts.

    This design enables users to test various configurations, integrate new modules, and adapt the system to specific research or development objectives without the need for specialized equipment or extensive downtime. Ideal for research labs and development environments, this platform supports the advancement of PEM electrolyzer technology through hands-on, flexible experimentation.

     

    Application note:
    Ideal for researchers investigating new PEM materials, flow field designs, and cell configurations. The system is an excellent tool for academic institutions and training centers, providing students and researchers with a hands-on understanding of PEM electrolysis processes and system operation. PEM Electrolyzer Test Station with power up to 3 kW is suitable for testing lab-scale or small to medium-scale electrolyzers, typically up to 60 cm². If the power requirements for a given electrolyzer are less than 2 A/cm², larger electrolyzers up to 100 cm² or more can also be tested.
    The entire system, as well as its component parts, are CE certified, which signifies that a product meets European Union (EU) health, safety, and environmental protection standards. Other certificates are available upon request.

    The Modular PEM Electrolyzer Test Station is continuously being improved, so the photos may not fully represent the current version of the device.

     

    Specification:
    weight: 150 kg
    height: 129 cm (25U)
    width: 135 cm (85 cm with folded monitors)
    depth: 90 cm
    maximum input power: 3 kW
    maximum input current: 120 A
    maximum input volatge: 60 V
    power connection: 230V, 3 kW, single phase

     

    Intrastat data:
    HS Code: 85433000
    Country of Origin: Sweden
    NET weight: 150 kg

     

    Setup includes:
    1 x Modular PEM Electrolyzer Test Station or selected module(s)

    Read more

  • SPE Connector.GC.1 for measurements in glass

    The connector enables the use of the biosensor or electrochemical sensor based on the substrates AC1, AC4 and TS1 in glass cell TC4, TC5, TC6 or TC7.

     

    The connector enables measurement with screen printed electrodes with width 7.26 mm and standard contact pads pitch (2.54 mm).
    It is compatible with other SPE´s that use the same distance between the contact pads (2.54 mm). The cone at the connector sensor side is NJ 8/10 which enables to use the connector with any standard chemical vessels.

     

    Termination: 2 mm Banana plugs

    Read more

  • Nexus

    Building on PalmSens’ legacy of providing top-tier solutions for accurate low-current measurements, Nexus delivers an ultra-low-noise performance that exceeds even our existing portable devices, while also supporting measurements up to 1 Ampere.

     

    More information could be found trough link:

    https://www.palmsens.com/product/nexus/

     

    • Bi)Potentiostat/ Galvanostat/ Impedance analyzer
    • FRA / EIS: 10 μHz up to 1 MHz
    • 11 current ranges: 100 pA to  1 A
    • Dual EIS with second sense electrode
    • Script your experiments using MethodSCRIPT
    • Use with PSTrace software for Windows

     

    Versatile

    Our high-end instrument, the Nexus, is a Potentiostat, Galvanostat, and optional a Frequency Response Analyser (FRA) for Electrochemical Impedance Spectroscopy (EIS). The Nexus has a large potential range (-12V to +12V) and current range (100 pA to 1 A) with a high resolution and low noise.

    The research software PSTrace makes using the Nexus a breeze. The scripting language MethodSCRIPT gives a user full control when needed. Looking for a multi-channel instrument? Just stack multiple instruments on top of each other.

    Configurable

    Nexus comes in different configurations:

    • optional EIS/FRA module with maximum frequency of 1 MHz
    • optional BiPotentiostat module for second WE

    Standard included

    Carrying padded bag containing:

    • High quality, double shielded cell cable with
      2 mm banana connectors for Working, Sense, Counter, Reference electrode and Ground
    • Chassis ground cable with croc clip (4 mm)
    • Hardware Sync Link cable
    • Crocodile clips
    • Calibration report
    • Dummy cell
    • USB cable and Ethernet cable
    • Manual and Quick Start document
    • PSTrace software for Windows
    • iR-compensation (ohmic drop compensation) module
    • Second Sense lead cable
     

    S2 and BiPot

    Nexus includes a Second Sense lead (S2) and an optional BiPotentiostat (BiPot) module.

    S2 – Additional voltage (potential) measurement point

    BiPot – Independent second working electrode for simultaneous current measurement

    These two features are independent and serve distinct purposes:

    • S2 (Second Sense Lead)
      S2 acts as an additional voltage-sensing input, with the same specifications as the main reference electrode. It measures the potential at a specific point in the cell and, because the current at that point is known, it can also be used to calculate impedance.
    • BiPot (BiPotentiostat Module)
      The BiPot module introduces a second working electrode (WE2), operating versus the same reference and counter electrodes as the main channel. In BiPotentiostat mode, both working electrodes (WE1 and WE2) are recorded simultaneously. WE2 operates in potentiostatic mode, meaning it can independently control its potential and measure its current.

    Why choose the Nexus?

    Read more