Category

Category

ZIVE SP5 – high quality potentiostat/galvanostat/impedance analyzer

  • Versatile high quality potentiostat/galvanostat/impedance analyzer
  • Control voltage range : ±10V, ±1V, ±100mV
  • Control current range : 50pA ~ 5A (500pA with gain, 11 ranges)

 

Application

  • Battery / Super capacitor
  • Fuel cell
  • Corrosion
  • Sensor
  • Solar cell
  • Other Echem experiments

 

Features

  • high quality potentiostat/galvanostat/impedance analyzer
  • ±10V@5Amp control range
  • current range (11 ranges)
    – 5nA to 5A
    – 500pA with gain
  • frequency range : 10uHz ~ 1MHz
  • built-in FRA : enables EIS tests
  • 14 EIS techniques capability(option) including multisine
  • capable of multitude of applications
    – corrosion, general electrochemistry, sensor, battery, fuel cell,
      supercapacitor, solar cell, etc.
  • bipolar pulse capability
  • voltage pulse or current pulse charge/discharge test(GSM,CDMA etc.),
    sine wave function for ripple simulation in battery test package
    & pulse plating available
  • high speed data sampling time
    – 2usec or 3usec depending on data point numbers
  • fast sweep mode(5000V/sec with 10mV data sampling)
  • iR compensation & measurement
  • 3 measurement/control voltage ranges &
    11 measurement/control current ranges
  • internal 542,000 data point storage & continuing experiment regardless
    of PC failure.
  • LCD diaplay
  • multichannel configuration available by connecting multiple SP5 or other ZIVE products
  • external booster (ZIVE ZB series) available
  • inclues basic software, Energy/Impedance/Battery/Echem analysis software packages
  • can use EIS data analysis software, ZMANTM and DC data analysis software
    IVMANTMwithough purchasing license code
  • free software upgrade   

 

 

Experimental Techniques

Basic techniques

  • Potentiostatic
  • Galvanostatic
  • Double step potentiostatic
  • Double step galvanostatic
  • OCP measurement
  • Potential sweep
  • Current sweep
  • Cyclic voltammetry
  • Fast potential sweep
  • Potentiostatic Ru measurement
  • Galvanostatic Ru measurement

 

Advanced software techniques(included)

  • EIS software package(EIS)
    – Potentiostat EIS
    – Galvanostatic EIS
    – Pseudo galvanostatic EIS
    – OCP* EIS
    – Potentiodynamic PEIS
    – Galvanodynamic GEIS
    – Poteniodynamic HFR
    – Galvanodynamic HFR
    – Galvanostatic HFR monitor
    – Potentiostatic HFR monitor
    – Multisine potentiostatic EIS
    – Multisine galvanostatic EIS
    – Intermittent potentiostatic EIS
    – Intermittent galvanostatic EIS
    (*) The system measures open circuit potential before each frequency
        change and applies AC sine wave on this potential.
     
  • Corrosion software package(COR)
    – Tafel(Tafel experiment)
    – Rp(Polarization resistance)
    – RpEc trend
    – PDYN(Potentiodynamic)
    – CYPOL(Cyclic polarization resistance)
    – GDYN(GalvanoDynamic)
    – Reactivation
    – Galvanic corrosion
    – Potentiostatic ECN
    – Galvanostatic ECN
    – ZRA mode ECN
     
  • Energy software package(BAT)
    a) Battery test technique
       – CC/CV test for cycle life test of lithium battery  
       – CC/CC tet for cycle life test of NiCd or NiMH battery
       – Discharging test
       – EVS(electrochemical voltage spectroscopy)
       – Variable scan rate CV
       – Potentiostatic IV curve
       – Galvanostatic IV curve
       – Steady state CV
       – PITT(Potentiostatic intermittent titration technique) test
       – GITT(Galvanostatic intermittent titration technique) test
       – Pulse mode is available for GSM & CDMA profile.
         Pulse shape profile can be measured by user’s demand.
    b) Control mode
       – Charge : CC, CC-CV, pulse, sine wave
       – Discharge : CC, CP, CR, pulse, sine wave
    c) Cut-off condition
       – Time, voltage, current, power, auxV etc.
       – Various battery charge/discharge test is available including
         pulse discharge for GSM, CDMA application
     
  • Electrochemical analysis software package(EAS)
    a) Step techniques
       – CA(Chronoamperometry)
       – CC(Chronocoulometry)
       – CP(Chronopotentiometry)
    b) Sweep techniques
       – LSV(Linear sweep voltammetry)
       – SDV(Sampled DC voltammetry)
       – Fast CV
       – Fast LSV
    c) Pulsed techniques
       – DPV(Differential pulse voltammetry)
       – SWV(Square wave voltammetry)
       – DPA(Diff.pulse amperometry)
       – NPV(Normal pulse voltammetry)
       – RNPV(Reverse normal pulse voltammetry)
       – DNPV(Differential normal pulse voltammetry)

 

Options

  • Power booster  
Power amplifier (CE)  
Power 40Watt
Compliance voltage ±10V
Max. current ±5A within power
Control speed selection 8 ea
Bandwidth 1MHz
Slew rate 10V/usec
Potentiostat mode(voltage control)  
Voltage control  
Control voltage range ±10, ±1V, ±100mV
Voltage resolution 16 bit per each range
Voltage accuracy ±0.02% fs(gain x1)
Max. scan range ±10V vs. ref. E
Current measurements  
Current range 11 ranges (auto/manual setting)
5nA to 5A (500pA with gain)
Current resolution 16 bit;
150uA, 15uA, 1.5uA, 1500nA, 15nA,
1.5nA, 150pA, 15pA, 1.5pA, 150fA, 15fA
Current accuracy ±0.02% f.s.(gain x1)>500nA
Galvanostat mode(current control)  
Current control  
Control current range max. ±5A
± full sacle depending on selected range
Current resolution 16 bit;
150uA, 15uA, 1.5uA, 1500nA, 15nA,
1.5nA, 150pA, 15pA, 1.5pA, 150fA, 15fA
Current accuracy ±0.02% f.s.(gain x1)>500nA f.s.
Voltage measurements  
Voltage range 10V, 1V, 100mV
Voltage resolution 16 bit; 0.3mV, 30uV, 3uV
Voltage accuracy ±0.02% fs(gain x1)
Electrometer  
Max. input voltage ±10V
Input impedance 2×1013Ω||4.5pF
Bandwidth >22MHz
CMRR >114dB
EIS(Internal FRA) for system  
Frequency range 10uHz ~ 1MHz
Frequency accuracy <0.01%
Frequency resolution 5000/decade
Amplitude 0.1mV ~ 5Vrms(potentiostatic)
0.1 ~ 70% f.s.(galvanostatic)
Mode Static EIS:
potentiostatic, galvanostatic,
pseudo-galvanostatic, OCP
Dynamic EIS:
potentiodynamic, galvanodynamic
Fixed frequency impedance:
potentiostatic, galvanostatic,
potentiodynamic, galvanodynamic
Multisine EIS:
potentiostatic, galvanostatic
Intermittent PEIS/GEIS
Main system  
PC communication USB2.0 high speed
Line voltage 100~240VAC, 50/60Hz
Size/Weight 169×254.6×361.3mm(WxHxD) / 2.05kg
Power consumption 24V@6.3A, 150Watt
LED run, busy, potentiostat, galvanostat
Software  
Max. steps per experiments 1000
Shutdown safety limits voltage, current, temperatrue etc.
Max. sampling rate 2usec or 3usec depending on data point numbers
Min. sampling time unlimited
Sampling condition time, dv/dt, dI/dt, temp. etc
Interface for system  
Auxiliary port  
– Digital output 3 (open collector)
– Digital input 2 (photo coupler)
– Auxiliary voltage inputs 3 analog input: ±10V
for measurement of WE vs. CE
CE vs. RE or other signal
– Analog output 1 analog output : ±10V
for stirrer, MFC, RDE etc.
Misc.port  
– Signal generator output 1 analog output for FRA output or
waveform generation output
– Peripheral communication 12C to control external devices
– Temperature measurement 1 K-type thermocouple input
– Zero resistance ammeter 5nA ~ 5A ranges
System  
Cell cable 1 meter shielded type (standard)
working, reference, counter, working sense
Control
DAC		 DSP with FPGA
2x16bit DAC(50MHz) for bias & scan
1x16bit DAC(1MHz) for analog output
Data acquisition
ADC		 2x16bit ADCs(500kHz) for voltage & current
4x16bit ADCs(250kHz) for auxiliary reading
and temperature reading
Calibration Automatic
Filter selection 4 ea(5Hz, 1kHz, 500kHz, 5MHz)
Scan rate 0 ~ 200V/sec in common mode
0 ~ 5000V/sec in fast mode
Max. channel No. 16 channels via USB connection
Max. output power 40Watt
Internal data memory 542,000 points
LCD display DC & EIS mode automatically
PC requirement  
Operating system Windows 7/8/10(32bit/64bit OS)
PC specification(minimum) Pentium4, RAM 1GB or higher
Display 1600×900 high color or higher
USB high speed 2.0
General  
Dummy cell One external dummy cell included
Thermocouple 1.5meter K-type (option)
Impedance data analysis software ZMANTM software
DC data analysis software IVMANTM software

The specifications are subject to change without notice.
   
Categories: ,

Related products

  • Hanging Platinum Drop Electrode

    The Hanging Platinum Drop Electrode (HPDE) is solid phase alanogy of HMDE.

     

    The drop of liquid Pt at 2000 °C forms a drop of Pt. The surface of HPDE has nearly ideal surface which is impossible to obtain using polishing. HPDE has also spherical symmetry which enables mathematical treatment of its response.
    The material is not toxic and it is chemically stable. The only disadvantage is HPDE cleaning, which can be, however, in some cases solved by carefull insertion of the electrode tip to the flame of an alcohol burner.
    Thus HPDE can be used as reference electrode for complicated electrochemical studies, where it is necessary to distinguish the analytical signal from the signal generated by surface inhomogenities.

     

    Hanging platinum drop electrode (HPDE) is designed for measurements with thermostated cell TC4, TC5, TC6 and TC9.

    Read more

  • Basic Sample Holder – metal contact, 4 mm max. thickness (redox.me)

    Basic Sample Holder with a metal contact works as an electrical conductor between an electrode material (free-standing or deposited on a substrate) and an external circuit. This holder consists of PEEK body, pure Tantalum, Stainless Steel 316L, Titanium, Copper or Nickel metal electrical contact, and PEEK screw to fix the electrode. It is compatible with most of inorganic and organic based plates, free-standing membranes or thin films deposited on flexible and rigid substrates. A maximum thickness of the sample is 4 mm. Tantalum is known to be inert to practically all organic and inorganic compounds. Tantalum’s corrosion resistance is very similar to that of glass, as both are unsuitable for use in hydrofluoric acid and strong hot alkali applications. Therefore, in those cases, we recommend the other wire contact variant.  The metal contact can be fully immersed in the electrolyte. 

     

    Application note
    Generally, the electrode is fabricated by fixing the electrochemical active sample into the holder using a screw. Such electrode is immersed in the ion-conducting solution as a working electrode or counter electrode. An electric current is passed between the working electrode and the counter electrode for a certain amount of time. Metal wire contact is permanently installed in the PEEK body. The holder is designed to be used multiple times. The holder should be cleaned prior to the installation of electrode material.

     

    Specification
    holder body material: PEEK
    rod diameter: 6 mm
    contact material: Ta, SS 316L, Ti, Cu or Ni
    contact wire diameter: 0.6 mm
    contact wire total length: 110 mm
    holder length: 70 mm
    maximum sample thickness: 4 mm

     

    Intrastat data
    HS Code: 90309000
    Country of Origin: Sweden
    NET weight: 100 g

     

    Product includes
    1 x Basic Sample Holder
    1 x PEEK M3 screw
    1 O-Ring (FKM for aqueous or FFKM for organic electrolytes)

    Read more

  • Activation furnance for electrochemical sensors

    The activation furnance is a device used for curing individual sensors of the AC1 type. At a defined temperature (up to 1000 °C) depending on the electrode and sensor materials. When the sensor is cured, the surface of the electrodes is cleaned from surface oxides and organic impurities, which results in regeneration of the sensor or its activation. In this way, for example, old sensors with immobilized enzyme layers can be cured for reuse – see example at the end ot the document.

    Read more

  • ZIVE SP2 – high quality potentiostat/galvanostat/impedance analyzer

    • Versatile high quality potentiostat/galvanostat/impedance analyzer
    • Control voltage range: ±10V, ±1V, ±100mV
    • Control current range: 200pA ~ 2A (200pA with gain, 11 ranges)

     

    Application

    • Battery/Super capacitor
    • Fuel cell
    • Corrosion
    • Sensor
    • Solar cell
    • Other Echem experiments

    Features

    • high quality potentiostat/galvanostat/impedance analyzer
    • ±10V@2Amp control range
    • current range (11 ranges)
      – 2A to 200pA
      – 200pA with gain
    • frequency range : 10uHz ~ 2MHz
    • built-in FRA : enables EIS tests
    • 14 EIS techniques capability including multisine
    • capable of multitude of applications
      – corrosion, general electrochemistry, sensor, battery, fuel cell,
      supercapacitor, solar cell, etc.
    • bipolar pulse capability
    • voltage pulse or current pulse charge/discharge test(GSM,CDMA etc.),
      sine wave function for ripple simulation in battery test package
      & pulse plating available
    • high speed data sampling time
      – 2usec or 3usec depending on data point number
    • fast sweep mode(5000V/sec with 10mV data sampling)
    • iR compensation & measurement
    • 3 measurement/control voltage ranges &
      11 measurement/control current ranges
    • internal 542,000 data point storage & continuing experiment regardless
      of PC failure.
    • LCD display
    • software package
      – Corrosion software package
      – EIS software package
      – Electrochemical analysis software package
      – Energy software package
    • multichannel configuration available by connecting multiple SP2 or other ZIVE products
    • power booster(ZIVE ZB series) available
    • inclues basic software, Energy(battery)/Impedance/Corrosion/Echem analysis software packages
    • free software upgrade

    Experimental Techniques

    Basic techniques

    • Potentiostatic
    • Galvanostatic
    • Double step potentiostatic
    • Double step galvanostatic
    • OCP measurement
    • Potential sweep
    • Current sweep
    • Cyclic voltammetry
    • Fast potential sweep
    • Potentiostatic Ru measurement
    • Galvanostatic Ru measurement

    Advanced software techniques(Included)

    • EIS software package(EIS)
      – Potentiostat EIS
      – Galvanostatic EIS
      – Pseudo galvanostatic EIS
      – OCP* EIS
      – Potentiodynamic PEIS
      – Galvanodynamic GEIS
      – Poteniodynamic HFR
      – Galvanodynamic HFR
      – Galvanostatic HFR monitor
      – Potentiostatic HFR monitor
      – Multisine potentiostatic EIS
      – Multisine galvanostatic EIS
      – Intermittent potentiostatic EIS
      – Intermittent galvanostatic EIS
      (*) The system measures open circuit potential before each frequency
      change and applies AC sine wave on this potential.
    • Corrosion software package(COR)
      – Tafel(Tafel experiment)
      – Rp(Polarization resistance)
      – RpEc trend
      – PDYN(Potentiodynamic)
      – CYPOL(Cyclic polarization resistance)
      – GDYN(GalvanoDynamic)
      – Reactivation
      – Galvanic corrosion
      – Potentiostatic ECN
      – Galvanostatic ECN
      – ZRA mode ECN
    • Energy software package(BAT)
      a) Battery test technique
      – CC/CV testforcycle life test of lithium battery
      – CC/CC tet forcyclelifetestofNiCd or NiMH battery
      – Discharging test
      – EVS(electrochemical voltage spectroscopy)
      – Variable scan rate CV
      – Potentiostatic IV curve
      – Galvanostatic IV curve
      – Steady state CV
      – PITT(Potentiostatic intermittent titration technique) test
      – GITT(Galvanostatic intermittent titration technique) test
      – Pulse mode is available for GSM & CDMA profile.
      Pulse shape profile can be measured by user’s demand.
      b) Control mode
      – Charge : CC, CC-CV, pulse, sine wave
      – Discharge : CC, CP, CR, pulse, sine wave
      c) Cut-off condition
      – Time, voltage, current, power, auxV etc.
      – Various battery charge/discharge test is available including
      pulse discharge for GSM, CDMA application
    • Electrochemical analysis software package(EAS)
      a) Step techniques
      – CA(Chronoamperometry)
      – CC(Chronocoulometry)
      – CP(Chronopotentiometry)
      b) Sweep techniques
      – LSV(Linear sweep voltammetry)
      – SDV(Sampled DC voltammetry)
      – Fast CV
      – Fast LSV
      c) Pulsed techniques
      – DPV(Differential pulse voltammetry)
      – SWV(Square wave voltammetry)
      – DPA(Diff.pulse amperometry)
      – NPV(Normal pulse voltammetry)
      – RNPV(Reverse normal pulse voltammetry)
      – DNPV(Differential normal pulse voltammetry)

    Options

    • Power booster
    Read more