Category

Category

Pipette Round Base Stand

A custom BVT pipette stand with a round base, designed for storing a large number of glass pipettes. Made to be robust and long-lasting, for easy organization, storage and use.

The round stand contains 35 holes with a diameter of 11.38 mm and 14 holes with
a diameter of 7.89 mm.

The stand is designed so that the lower round base of the stand can be separated from the stand for easy washing.

Useful Documents

Pipette Round Base Stand – Data Sheet

Categories: ,

Related products

  • Activation furnance for electrochemical sensors

    The activation furnance is a device used for curing individual sensors of the AC1 type. At a defined temperature (up to 1000 °C) depending on the electrode and sensor materials. When the sensor is cured, the surface of the electrodes is cleaned from surface oxides and organic impurities, which results in regeneration of the sensor or its activation. In this way, for example, old sensors with immobilized enzyme layers can be cured for reuse – see example at the end ot the document.

    Read more

  • Hanging Platinum Drop Electrode

    The Hanging Platinum Drop Electrode (HPDE) is solid phase alanogy of HMDE.

     

    The drop of liquid Pt at 2000 °C forms a drop of Pt. The surface of HPDE has nearly ideal surface which is impossible to obtain using polishing. HPDE has also spherical symmetry which enables mathematical treatment of its response.
    The material is not toxic and it is chemically stable. The only disadvantage is HPDE cleaning, which can be, however, in some cases solved by carefull insertion of the electrode tip to the flame of an alcohol burner.
    Thus HPDE can be used as reference electrode for complicated electrochemical studies, where it is necessary to distinguish the analytical signal from the signal generated by surface inhomogenities.

     

    Hanging platinum drop electrode (HPDE) is designed for measurements with thermostated cell TC4, TC5, TC6 and TC9.

    Read more

  • SPE Connector.1 for electrochemical sensors

    The connector enables the use of the biosensor or electrochemical sensor based on the substrates AC1, AC4, AC13 and TS1 1 in classical electrochemical arrangement.

     

    The connector enables measurement with screen printed electrodes with width 7.26 mm and standard contact pads pitch (2.54 mm).
    It is compatible with other SPE´s that use the same distance between the contact pads (2.54 mm). 

     

    Termination: 2 mm Banana plugs

    Read more

  • EmStat4X

    The EmStat4X delivers high performance in a small footprint. The EmStat4X is a small battery and USB-powered Potentiostat, Galvanostat, and optional Frequency Response Analyser (FRA) for Electrochemical Impedance Spectroscopy (EIS).

    The EmStat4X Low Range (LR) version is great for applications that require measuring low currents down to picoamps, like (bio)sensor research. The High Range (HR) version is very suitable for applications that need a maximum current of up to 200 mA. The EmStat4X is controlled with PSTrace for Windows, or you can write your own MethodSCRIPT and control it from any platform or operating system.

     

    More information can be found through the link: https://www.palmsens.com/product/emstat4s/

     

    The EmStat4X LR and HR features include:

    • Fast EIS support: for running fixed-frequency EIS measurements at a very low interval of around 1 ms.
    • Auxiliary Port: for connecting to a MUX8-R2 multiplexer, temperature sensor, pH sensor, stirrer control, triggering and more.
    • iR compensation: to compensate for the iR drop between the Reference electrode and the outside of the double layer of the electrochemical cell.
    • Bluetooth: for a wireless connection to a PC, smartphone or tablet
    • 11.1 Wh battery: for more than 8 hours of continuous measurements (typical with the LR).
    • Small borderless display: showing the state of the battery and connectivity.

    Two versions

    The EmStat4X comes in two different versions:

    • Low Range: for lower currents and potentials (±30 mA / ±3 V applied / ±5 V compliance)
    • High Range: for higher currents and potentials (±200 mA / ±6 V applied / ±8 V compliance)

    Both versions can be configured with optional EIS/FRA up to 200 kHz.
    See specifications for a detailed comparison between the LR and HR.

     

    Always a backup

    The EmStat4X is equipped with 500 MB internal storage memory for storing your measurements as a backup. All internally stored measurements can be browsed and transferred back to the PC easily using the PSTrace software for Windows. Your data is always with your instrument wherever you take it.

     

    Standard included

    A standard EmStat4X includes a rugged carrying case with:

    • EmStat4X LR or HR
    • USB-C cable
    • Cell cable: high quality, double-shielded cable with 2 mm banana connectors for Working, Counter, Reference electrode and Ground, 1 meter long
    • 4 or 5 crocodile clips
    • Dummy Cell

    Also included:

    • PSTrace software for Windows (on USB drive)
    • Manual (hardcopy)
    • Quick Start (hardcopy)
    • Calibration report
    Read more