Category

Category

Activation furnance for electrochemical sensors

The activation furnance is a device used for curing individual sensors of the AC1 type. At a defined temperature (up to 1000 °C) depending on the electrode and sensor materials. When the sensor is cured, the surface of the electrodes is cleaned from surface oxides and organic impurities, which results in regeneration of the sensor or its activation. In this way, for example, old sensors with immobilized enzyme layers can be cured for reuse – see example at the end ot the document.

Useful Documents

Activation furnance for electrochemical sensors Data Sheet

 

Categories: ,

You may also like…

  • TC5 Electrochemical Glass Cell

    Borosilicate glass cell serves for electrochemical measurements. The cell is jacketed.

    The analyzed solution can be thermostated by external thermostat.

    Cell openings are designed for electrochemical sensors connector KA1.C, classical electrodes WCEc, ACEc, RCEc and stirrer ST1, ST3 separately.

    Read more

  • ST3 Universal Stirrer for screen printed and classical electrodes

    • Precision Maxon motor with gearbox and encoder
    • ST3 is controlled by PC software
    • ST3 allows the solution to be mixed and particles to be optimally transferred to the surface of the printed or conventional electrodes
    • The construction of stirrer assures the optimum mass transport with the minimum hydrodynamic noise.
    • Stirrer is manufactured from quality and suitable chemical measurements.
    • Revolution range: 20-1300 rpm (with resolution 1 rpm)
    Read more

  • ST1.* Universal Stirrer for screen printed and classical electrodes

    • The universal stirrer ST1 uses a common  micro DC motor
    • ST1 allows the solution to be mixed and  the particles to be optimally transferred  to the surface of the printed or conventional electrodes.
    • The construction of stirrer assures the optimum mass transport with the minimum hydrodynamic noise.
    • The supply voltage 0 – 5 V and the maximum current of 450 mA mean that it can be used as a USB device.
    • The stirrer is manufactured from quality materials and suitable chemical measurements.
    • Revolutions range: 120 – 12 000 rpm
    View products

Related products

  • AC1.GP. Electrochemical sensor with a working electrode of guaranteed purity

    Basic amperometric three-electrode sensor with patented structure made by thick film technology.

     

    Dimensions: 25.40 mm x 7.26 mm x 0.63 mm

    WE material: gold, platinum, silver, copper, iron, nickel, cobalt, chromium, tantalum, irridium, rhenium, magnesium, palladium, zirconium and others

     

    *Selection of sensor electrode materials other than those listed above is possible upon agreement with the customer.

     

     

    The sensor is made on a corundum ceramic base. Working, reference and auxiliary electrodes are applied to this surface. Working, reference and auxiliary electrodes are made of different materials. At the end of the sensor there is a contact field that is connected to the active part by silver conductive paths that are covered with a dielectric protective layer. The working electrode of the sensor with a diameter of 2 mm is made of a material of guaranteed purity of up to 99.99 % depending on the selected material– standard layer thickness 0.0125 mm.

     

     

    We also offer a working electrode made of polished gold AC1P.W*.R*, with homogenous surface with roughness less than 1 µm.

     

    We also offer activated graphite sensors on customer request.

     

    Read more

  • Desiccator

    An airtight container which maintains an atmosphere of low humidity through the use of a suitable drying agent which occupies the bottom part of the desiccator. It is for the storage of dry objects that must not be exposed to the moisture normally present in the atmosphere.

    Read more

  • Nexus

    Building on PalmSens’ legacy of providing top-tier solutions for accurate low-current measurements, Nexus delivers an ultra-low-noise performance that exceeds even our existing portable devices, while also supporting measurements up to 1 Ampere.

     

    More information could be found trough link:

    https://www.palmsens.com/product/nexus/

     

    • Bi)Potentiostat/ Galvanostat/ Impedance analyzer
    • FRA / EIS: 10 μHz up to 1 MHz
    • 11 current ranges: 100 pA to  1 A
    • Dual EIS with second sense electrode
    • Script your experiments using MethodSCRIPT
    • Use with PSTrace software for Windows

     

    Versatile

    Our high-end instrument, the Nexus, is a Potentiostat, Galvanostat, and optional a Frequency Response Analyser (FRA) for Electrochemical Impedance Spectroscopy (EIS). The Nexus has a large potential range (-12V to +12V) and current range (100 pA to 1 A) with a high resolution and low noise.

    The research software PSTrace makes using the Nexus a breeze. The scripting language MethodSCRIPT gives a user full control when needed. Looking for a multi-channel instrument? Just stack multiple instruments on top of each other.

    Configurable

    Nexus comes in different configurations:

    • optional EIS/FRA module with maximum frequency of 1 MHz
    • optional BiPotentiostat module for second WE

    Standard included

    Carrying padded bag containing:

    • High quality, double shielded cell cable with
      2 mm banana connectors for Working, Sense, Counter, Reference electrode and Ground
    • Chassis ground cable with croc clip (4 mm)
    • Hardware Sync Link cable
    • Crocodile clips
    • Calibration report
    • Dummy cell
    • USB cable and Ethernet cable
    • Manual and Quick Start document
    • PSTrace software for Windows
    • iR-compensation (ohmic drop compensation) module
    • Second Sense lead cable
     

    S2 and BiPot

    Nexus includes a Second Sense lead (S2) and an optional BiPotentiostat (BiPot) module.

    S2 – Additional voltage (potential) measurement point

    BiPot – Independent second working electrode for simultaneous current measurement

    These two features are independent and serve distinct purposes:

    • S2 (Second Sense Lead)
      S2 acts as an additional voltage-sensing input, with the same specifications as the main reference electrode. It measures the potential at a specific point in the cell and, because the current at that point is known, it can also be used to calculate impedance.
    • BiPot (BiPotentiostat Module)
      The BiPot module introduces a second working electrode (WE2), operating versus the same reference and counter electrodes as the main channel. In BiPotentiostat mode, both working electrodes (WE1 and WE2) are recorded simultaneously. WE2 operates in potentiostatic mode, meaning it can independently control its potential and measure its current.

    Why choose the Nexus?

    Read more

  • Modular PEM Electrolyzer Test Station up to 3 kW (redox.me)

    The Modular PEM Electrolyzer Test Station is a versatile and flexible solution designed for the testing and evaluation of proton exchange membrane (PEM) electrolyzers. Unlike fully automated, integrated systems, this platform features modular components that can be easily swapped by the end user, allowing for customized setups and adaptability to different testing needs. The platform is engineered to provide precise control and measurement of electrochemical performance while offering the convenience of easily replaceable parts.

    This design enables users to test various configurations, integrate new modules, and adapt the system to specific research or development objectives without the need for specialized equipment or extensive downtime. Ideal for research labs and development environments, this platform supports the advancement of PEM electrolyzer technology through hands-on, flexible experimentation.

     

    Application note:
    Ideal for researchers investigating new PEM materials, flow field designs, and cell configurations. The system is an excellent tool for academic institutions and training centers, providing students and researchers with a hands-on understanding of PEM electrolysis processes and system operation. PEM Electrolyzer Test Station with power up to 3 kW is suitable for testing lab-scale or small to medium-scale electrolyzers, typically up to 60 cm². If the power requirements for a given electrolyzer are less than 2 A/cm², larger electrolyzers up to 100 cm² or more can also be tested.
    The entire system, as well as its component parts, are CE certified, which signifies that a product meets European Union (EU) health, safety, and environmental protection standards. Other certificates are available upon request.

    The Modular PEM Electrolyzer Test Station is continuously being improved, so the photos may not fully represent the current version of the device.

     

    Specification:
    weight: 150 kg
    height: 129 cm (25U)
    width: 135 cm (85 cm with folded monitors)
    depth: 90 cm
    maximum input power: 3 kW
    maximum input current: 120 A
    maximum input volatge: 60 V
    power connection: 230V, 3 kW, single phase

     

    Intrastat data:
    HS Code: 85433000
    Country of Origin: Sweden
    NET weight: 150 kg

     

    Setup includes:
    1 x Modular PEM Electrolyzer Test Station or selected module(s)

    Read more