Mini Rotating Disk Electrode Kit

The Mini Rotating disk electrode (RDE) in general enables defined mass transfer towards electrode surface.

 

The Mini RDE consists of the body of the RDE (motor) with 6 pcs of interchangeable electrode tips for RDE. The device is equipped by control electronics and SW and powered by USB connection with PC. Rotational speed of Mini RDE is 10 – 1300 rpm.

 

The Kit also includes:

  • TC4 electrochemical glass cell, which openings are suitable for included connector KA1.C.S
  • 20 pcs of Screen printed sensors (type AC1., AC2., AC4.)
  • classical reference electrode RCEc.

 

During measuring with Mini RDE in a classic three-electrode connection, it is also advisable to use the classical auxiliary electrode ACEc.

Categories: ,

You may also like…

  • STP1.* Stoppers for Cells

    Stoppers are formed from white PBTP (Polybutylenterephtalate). They are used for covering of the glass cells produced by BVT.

     

    The system with the stopper is closed and space is prevent from solution evaporation.

    Model Recommended Vessel Termination
    STP1.S TC4, TC5, TC6 Stopper for TC4, TC5, TC6
    STP1.1 TC4, TC5, TC6 Stopper with bubbling
    STP1.2 TC4, TC5, TC6 Stopper with tubing
    STP1.3 TC4, TC5, TC6 Middle stopper
    Read more
  • ACEc Auxiliary Classic Electrode Conic

    ACEc is a glass tube with platinum plate wire.

     

    Standard connection is with a 2 mm banana plug. Auxiliary classic electrode (ACEc) is designed for measurements with thermostated cell TC4, TC5, TC6, TC9.

    Read more
  • TC5 Electrochemical Glass Cell

    Borosilicate glass cell serves for electrochemical measurements. The cell is jacketed.

    The analyzed solution can be thermostated by external thermostat.

    Cell openings are designed for electrochemical sensors connector KA1.C, classical electrodes WCEc, ACEc, RCEc and stirrer ST1, ST3 separately.

    Read more
  • PalmSens4

    The PalmSens4, is a USB and battery powered Potentiostat, Galvanostat, and optional a Frequency Response Analyser (FRA) for Electrochemical Impedance Spectroscopy (EIS).

     

    Compact, versatile and powerful

    • (Bi)Potentiostat / Galvanostat / Impedance Analyzer
    • FRA / EIS: 10 μHz up to  1 MHz
    • 9 current ranges: 100 pA to 10 mA
    • 18-bit resolution
    • Bluetooth or USB connection

     

    The PalmSens4 has a large potential range (-5V to 5V or -10V to 10V) and current range (100 pA to 10 mA) with a high resolution and low noise. The economical PalmSens4 is a complete laboratory instrument but its compact and rugged design makes it also ideal for field work.

    Connecting via Bluetooth guarantees a perfectly floating measurement.

     

    More information can be found through the link: https://www.palmsens.com/product/palmsens4/

     

    Configurable

    PalmSens4 comes in different configurations:

    • ±5 V or ±10 V potential range
    • EIS/FRA with maximum frequency of 100 kHz or 1 MHz
    • optional BiPotentiostat module for second WE
    • optional iR-Compensation

    Standard included

    • Rugged carrying case
    • High quality, double shielded cell cable with
      2 mm banana connectors for Working, Counter, Reference electrode and Ground
    • Crocodile clips
    • Dummy cell
    • USB cable
    • Manual and Quick Start document
    • PSTrace software for Windows

     

     
    Read more