OE.D*.E** Oxygen Electrode

You may also like…

• 

  TC5 Electrochemical Glass Cell

  Borosilicate glass cell serves for electrochemical measurements. The cell is jacketed.

  The analyzed solution can be thermostated by external thermostat.

  Cell openings are designed for electrochemical sensors connector KA1.C, classical electrodes WCEc, ACEc, RCEc and stirrer ST1, ST3 separately.

  Read more
• 

  ISE Ion Selective Electrodes

  Ion Selective Electrodes, ISEs, are analytical tools widely used for potentiometric analysis of large scale of various ionic analytes.

   

  ISEs enable routine analysis in agriculture, food process, soil analysis, environmental anylysis, tribotechnical analysis, explosives and pyrotechnical mixtures analysis. They can be used for water, pot-, waste-, boiler-, mineral-, and well water samples.

   

  These electrodes allow for direct measurements of Ammonium, Lithium, Sodium, Calcium, Fluoride, Nitrate, Potassium and Barium.

   

  Electrodes are applicable to all commonly used measuring apparatus, with internal resistance of above 10^9 – 10^12 ohm.

  Diameter: 12 mm.

  Standard electrical connecting cable is 0.8 to 1 m. coaxial cable with BNC connector.

  The work with ion selective electrodes is time effective, requires an only small amount of chemicals, and a friendly price of measuring equipment MPH472.

  Read more
• 

  MT-1 Minithermostat

  Technical Parameters

  • Supply: 12 V
  • Min temperature: -9.9°C
  • Max temperature: 59.9 °C
  • For TC4, TC6 or Eppendorf microvials

  Device Usage

  • Cooling/heating of solution of temperature sensitive chemicals during experiments
  • Maintaining of chemicals at exact temperature
  • The electrochemical measurement with thermodiffusion
  • Heated electrodes technology

  The option with Eppendorf microvials 0.2 ml, 0.5 ml, 1.5 ml is possible

  Minithermostat device is designed for tempering an electrolytic bath for electrochemical measurements. The temperature is stabilized and the Peltier thermal element, which allows cool or warm the measured electrolytic samples.

  Read more
• 

  MPH 472 Universal Potentiostat

  The instrument enables measurement of amperometry, potentiometry and conductometry. Communication with the computer is provided via USB or Bluetooth. This hand-held device is equipped with GPS navigation so the measured data may be enhanced by the exact coordinates of the location where the measurement was made.

   

  Measured data can be stored and later processed in a PC because of the SD card slot incorporation. The ability to record a waveforms or integrate the measure values is enabled. Basic evaluation methods are also implemented – linear and non-linear calibration and standard addition method is available. The influence of the type of oxygen electrode membrane, temperature or gas solubility can be compensated for the measured values.

   

  The measured data are automatically recalculated and displayed in units of current, voltage, concentration (g∙L-1 or mol∙L-1) or saturation. Potentiometric measurement allows connection of pH electrodes and ISE.

   

  Key Properties

  • Up to 200 hours of battery life depending on the operating mode.
  • Excellent analytical tools (graphs, unit conversions, internal standard method for potentiometry, coulometric titration, 10 Henry’s constants for various redox active gases).
  • Power supply and data communication via USB, possibility of connection via Bluetooth.
  • Data logging to memory card.
  • Up to 5-point calibration for ISE and pH electrodes.
  • Up to 4-point calibration of the conductivity cell makes it possible to compensate the non-linearity of the measurement.
  • GPS equipment enables measurements in the field with location storage.
  • Calibration stored separately in the device (possibility of changing the memory card without having to recalibrate the device).
  • Possibility of separate calibration for 4 probes for amperometry and potentiometry.
  • The possibility of using different temperature sensors (PT100, PT1000, Ni1000, ATC Monocrystals).
  • Advanced power management (display sleep and automatic device shutdown can be set according to the user’s preferences
  • Vector voltmeter for accurate conductivity measurement.
  • Powerful thirty-two-bit microprocessor for accurate measurement calculations.

  Improvements:

  • Faster battery charging via USB charger.
  • Vector voltmeter for precise conductometric measurement.
  • A more sensitive GPS module.
  • More robust input circuits for ametrometric measurement –  less susceptible to noise.

   

  More information can be found through the link: https://www.monokrystaly.cz/cs/ph-mv-ion-metry.html?fbclid=IwAR3ieir-mH-D10LZ-SZkrx74OHZYvOHjZPnOX8nfi9WdcwostsUgTAVaZPM#MPH471 

   

  Read more